Language
Login |Register
Home
Product Center
Digital Oscilloscope
SDS2000X-E Series


SDS2000X-E Series Super Phosphor Oscilloscopes


Product Overview


SIGLENT’s new SDS2000X-E Series Super Phosphor Oscilloscopes are available in two bandwidths; 200 MHz and 350 MHz. They each have a maximum sampling rate of 2 GSa/s and a standard record length of 28 Mpts. The most commonly used functions can be accessed with its user-friendly one-button design.

The SDS2000X-E series employs a new generation of SPO technology. With its excellent signal fidelity, background noise is lower than similar products in the industry. It has a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). It also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Siglent’s newest oscilloscope offering supports multiple powerful triggering modes including serial bus triggering and decoding. History waveform recording and sequential triggering allow for extended waveform records to be captured, stored, and analyzed. Also included is the deep memory FFT. This math function uses upto 1 M samples for the FFT calculation, providing the SDS2000X-E with very high frequency resolution. The hardware co-processor executes true fast measurement and math to all of 28M sample points so that there is minimal distortion on analysis. It also supports searching and navigating, on-screen Bode plot, 16 channel digital /MSO (optional), an external USB powered 25 MHz AWG function generator module (option), a USB WIFI adapter for wireless control and monitoring (option), and an embedded application that allows remote control via web browser. The features and high-performance of the SDS2000X-E oscilloscopes cannot be matched else anywhere at this price.


Key Features


▪ 200MHz, 350MHz bandwidth models
▪ Real-time sampling rate up to 2 GSa/s (1 GSa/s per channel, if bothchannels active)
▪ The newest generation of SPO technology
    · Waveform capture rate up to 110,000 wfm/s (normal mode), and
    · 400,000 wfm/s (sequence mode)
    · Record length up to 28 Mpts
    · Digital trigger system
▪ Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern
▪ Serial bus triggering and decoding (standard), supports protocols IIC, SPI,UART, CAN, LIN
▪ Video trigger, supports HDTV
▪ Low background noise with voltage scales from 500μV/div to 10V/div
▪ 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
▪ Segmented acquisition (Sequence) mode, divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture qualifying events
▪ History waveform record (history) function (maximum recorded waveform length is 80,000 frames)
▪ Automatic measurement function for 38 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions
▪ 1 Mpt FFT
▪ Math and measurement functions use all sampled data points in memory (up to 28 Mpts)
▪ Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
▪ Preset key can be customized for user settings or factory "defaults"
▪ Security Erase mode
▪ High Speed hardware based Pass/ Fail function
▪ 16 Digital channels (MSO) (option)
▪ Bode plot
▪ Search and navigate
▪ USB AWG module(option)
▪ USB WIFI adapter(option)
▪ Web Browser based control
▪ Large 7 inch TFT -LCD display with 800 * 480 resolution
▪ Multiple interface types: USB Host, USB Device (USB -TMC), LAN, Pass / Fail, Trigger Out
▪ Supports SCPI remote control commands
▪ VXI-11+SCPI, Telnet (port 5024) +SCPI and Socket (port 5025) +SCPI programming over LAN
▪ Supports web control and virtual instrument control panel for both PC and mobile terminals
▪ Supports Multi-language display and embedded online help



Design Features


Maximum sample rate of 2 GSa/s, record Length of up to 28Mpts

Waveform Capture Rate up to 400,000 wfm/s
  
Using hardware-based Zoom technologies and max record length of up to 28Mpts, users are able to oversample to capture for longer time periods at higher resolution and use the zoom feature to see more details within each signal. 


With a waveform capture rate of up to 400,000 wfm/s (sequence mode), he oscilloscope can easily capture the unusual or low-probability events.



Serial Bus Decoding Function (Standard)

History Waveforms (History) Mode and
Segmented Acquisition (Sequence)

SDS2000X-E displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in a tabular format. 

Playback the latest triggered events using the history function. Segmented memory collection will store trigger events into multiple (Up to 80,000) memory segments, each segment will store triggered waveforms and timestamp of each frame. 



True measurement to 28 M points
1 Mpoint FFT

SDS2000X-E can apply automatic measurements on all sampled data points up to 28 Mpts. This ensures the accuracy of measurements while the math co-processor decreases measurement time and increases easeof-use.

The new math co-processor enables FFT analysis of incoming signals using up to 1 million samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs.



Hardware-Based High Speed Pass/Fail function

16 Digital Channels/MSO (option)

The SDS2000X-E utilizes a hardware-based Pass/Fail function, performing up to 40,000 Pass / Fail decisions each second. Easily generate user defned test templates provide trace mask comparison making it suitable for long-term signal monitoring or automated production line testing.

16 digital channels enables users to acquire and trigger on digital input channels and view both digital and analog waveforms simultaneously with one instrument.



USB 25 MHz AWG Module (option)

Search and Navigate



The optional 25 MHz function/arbitrary waveform generator is operated from the USB host connection. Functions include Sine, Square, Ramp, Pulse, Noise, DC and 45 additional built-in waveforms. The arbitrary waveforms can be accessed and edited by the SIGLENT EasyWave PC software.

The SDS2000X-E can search events specified by the user in a frame. It can also navigate by time (delay position) and historical frames.



Bode Plot





SDS2000X-E can control the USB AWG module or an independent SIGLENT SDG instrument, scan a circuits amplitude and phase frequency response, and display the data as a Bode Plot. It can also show the result lists, and export the data to a USB disk.



USB WIFI Adapter (option)

Web control



WiFi control of instrumentation can provide a convenient and safe method of configuring and collecting data. This new feature works with a SIGLENT approved WiFi adapter to provide wireless control and communications with SIGLENT SDS2000X-E scopes.

With the new embedded web server, users can control the SDS2000X-E from a simple web page. This provides wonderful remote troubleshooting and monitoring capabilities. The web page has PC and mobile styles that include an embedded virtual control panel.



Real-time update screen in web page


Complete Connectivity



With 100 Mbps LAN, the internal web page can update at a rate of up to 10 times/s, providing a nearly-real time update of waveform data and measurements. When viewed on a PC, the screen can be displayed in full screen mode. With this feature and a PC VGA interface, you can easily use a projector or other video display device to deliver the screen information to a larger audience.
SDS2000X -E supports USB Host, USB Device (USB -TMC), LAN, Pass/Fail and Trigger Out.



Ordering Information


Ordering information
Product Name
SDS2000X-E Series Digital Oscilloscope
SDS2202X-E 200 MHz
SDS2352X-E 350 MHz
Standard Accessories
USB Cable - 1
Quick Start - 1
Passive Probe - 2
Certification of Calibration - 1
Power Cord - 1
Optional Accessories 16 Channels MSO Software SDS2000X-E-16LA
16 Channels Logic Analyzer SLA1016
AWG Software SDS2000X-E-FG
USB AWG Module Hardware SAG1021
WIFI Software SDS2000X-E-WIFI
USB WIFI Adapter
TL_WN725N
Isolated Front End
ISFE
STB Demo Source
STB-3
High Voltage Probe
HPB4010
Current Probes

CP4020/CP4050/CP4070/CP4070A/

CP5030/CP5030A/CP5150/CP5500

Differential Probes

DPB4080/DPB5150/DPB5150A/

DPB5700/DPB5700A

Rack Mount SDS1X-E-RMK



For detailed specifications, please refer toSDS2000X-E Series Datasheet



SeriesBandwidthChannelsReal time sampling rateCapture rateMemory depth
SDS2202X-E
200MHz 2+EXT 2 GSa/s 110,000 wfm/s (normal mode) 400,000 wfm/s (sequence mode) 14 Mpts/CH (not interleave mode) 28 Mpts/CH (interleave mode)
SDS2352X-E
350 MHz 2+EXT 2 GSa/s 110,000 wfm/s (normal mode) 400,000 wfm/s (sequence mode) 14 Mpts/CH (not interleave mode) 28 Mpts/CH (interleave mode)

Address: Antongda Industrial Zone, 3rd Liuxian Rd, Bao’an District, Shenzhen         Shenzhen ICP 09076277 © 2015 

                                     Google+  SIGLENT website -- International