Language
Login |Register
Home
Product Center
Waveform Generator
SDG800 Series


SDG800 Series Function/Arbitrary Waveform Generators




Product Overview

The SDG800 series function/arbitrary waveform generator family outputs waveform functions up to up to 5MHz (pulse), 10MHz (square), 30MHz (sine) and has a sampling rate of 125MSa/s. They are powered with SIGLENT’s EasyPulse technology which produces low jitter, fast rising/falling edges without being affected by frequency, even at low duty cycle settings, allowing the user a wide range of pulse widths and transition times. This results in a much more versatile generator than other similar DDS designs.


Key Features

◆ Advanced DDS technology, 125MSa/s sampling rate, 14bit vertical resolution

◆ Single channel output, 5 types of standard waveforms, built-in 46 kinds of arbitrary waveforms (including DC)

◆ Complete modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep, and burst

◆ Innovative EasyPulse technology, can output pulses with low jitter and quick rising/falling edges

◆ Standard interfaces: USB Device, USB Host, support U-Disk storage

◆ Provides 10 nonvolatile storage spaces for user’s arbitrary waveforms

◆ Can be seamlessly connected to SIGLENT Digital Storage Oscilloscope

◆ Configurable with powerful arbitrary waveform editing software EasyWave


Characteristics


Comparison of edge under 1KHz pulse signal



As shown in the figure, under 1KHz frequency, EasyPulse can keep quick rising/falling edge (20ns) while the edge of ordinary DDS is very slow.


Comparison of edge adjusting range under 1KHz pulse signal



EasyPulse edge adjustment has a wide range, while ordinary DDS pulse edge adjustment is limited.


Built-in 46 kinds of arbitrary waveforms (including DC)



SDG800 Series can output 5 kinds of standard waveforms and 46 kinds of commonly used waveforms, including common waveforms, mathematical functions, application functions, window functions and trigonometric functions.


Multiple modulation function



SDG800 Series support multiple modulation function: AM, DSB - AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep and burst.


Supports PC editing software EasyWave



Siglent’s SDG800 Series of generators support powerful PC editing software, EasyWave, which can output arbitrary waveforms with 14bit vertical resolution and 16 Kpts wave length. EasyWave provides 9 standard waveforms: Sine, Square, Ramp, Pulse, ExRise, ExpFall, Sinc, Noise and DC, which meet all engineers’ basic needs. In addition, it provides a variety of drawing modes including manual drawing, straightline drawing (including horizontal straightline, vertical straightline, point-to-point straightline), coordinate drawing and equation drawing, making it easy to generate complex waveforms. Multiple Document Interface management allows for simultaneous multiple-waveform editing. The SDG800 Series provides 10 nonvolatile storage spaces for arbitrary waveforms, and you can also edit and store more waveforms through the EasyWave software.



Ordering Information


Product Model

SDG830, 30 MHz, 1 channel

SDG810, 10 MHz, 1 channel

SDG805, 5 MHz, 1 channel
Standard Accessories
Warranty Card
A USB cable
A QuickStart Guide
A product qualification certificate
A power cord designed for the instrument and authorized by local country
Optional Accessories
USB-GPIB adapter
BNC Cable


For detailed specifications, please refer to 《SDG800 Series Function/Arbitrary Waveform Generators Datasheet》



SeriesMax output frequencyMax sampling rateVertical resolutionWave length Channels
SDG830
30MHz 125M Sa/s 14bit 16Kpts 1CH
SDG810
10MHz 125M Sa/s 14bit 16Kpts 1CH
SDG805
5MHz 125M Sa/s 14bit 16Kpts 1CH

Address: Antongda Industrial Zone, 3rd Liuxian Rd, Bao’an District, Shenzhen         Shenzhen ICP 09076277 © 2015 

                                     Google+  SIGLENT website -- International