Language
Login |Register
Home
Product Center
Digital Oscilloscope
SDS1000X-E Series
SDS1202X-E Firmware UpdateCurrent Version: V1.3.26 | Published:2019-07-04Download
History Version
SDS1000X-E Labview DriverCurrent Version: V1.1.2.1 | Published:2019-05-31Download
History Version
SLA1016 Firmware (Optional For 4-Channel)Current Version: V8.1.16 | Published:2019-05-31Download
History Version
SDS1004X-E Firmware UpdateCurrent Version: 6.1.33 | Published:2019-05-31Download
History Version
SLA1016(Optional) Firmware UpdateCurrent Version: V8.1.11 | Published:2018-09-26Download
History Version
SDS1004X-E Firmware UpdateCurrent Version: V6.1.26 | Published:2018-09-26Download
History Version
SDS1002X-E Firmware UpdateCurrent Version: V1.3.23 | Published:2018-09-26Download
History Version
EasyScopeX for SDS1000X-ECurrent Version: V100R001B02D01P20 | Published:2018-06-07Download
History Version
SLA1016 Firmware (Optional For 4-Channel) Current Version: V7.8.1.9 | Published:2018-05-22Download
History Version
SDS1004X-E Operating System (Only For 4-Channel )Current Version: V1 | Published:2018-05-22Download
History Version
SDS1004X-E Firmware UpdateCurrent Version: V6.1.25R2 | Published:2018-05-22Download
History Version
SLA1016(Optional) Firmware UpdateCurrent Version: v7.8.1.8 | Published:2018-02-08Download
1.Initial formal release of SLA1016
History Version
SDS1002X-E Firmware UpdateCurrent Version: v1.3.17R1 | Published:2018-02-07Download
Fixed bug: Sometimes Auto setup fails on probe compensation output
1.Fixed bug: Corrected under-compensation from probe compensation waveform on 100 mV/div ranges
2.Fixed bug: FFT horizontal frequency div is wrong. The wrong sequence is shown: 5 Hz, 2 Hz, 1 Hz, 2 Hz, 5 Hz, 100 mHz, 200 mHz
3.Optimized translation for German and English menus and pop-up messages
4.Fixed bug: The scope does not save the‘limit range’of slope trigger while powered off
5.Fixed bug: The waveform disappears from the Zoom window at the edge of screen with the timebase set to500ns/div.
6.Fixed bug: There is an issue with the Y cursor offset/scaling, probe with x10 setting. The Y1/Y2 cursor values don’t match the Y voltage division/offset of the selected input channel
7.Fixed bug: Track cursor source set to track the waveform in the zoom window, but it tracks main window
History Version
SDS1004X-E Firmware UpdateCurrent Version: v6.1.20R1 | Published:2018-02-07Download
1.Fixed a bug in 6.1.20 which maybe cause signal disappear after self-calibration for Channels​
2.Supported all of Siglent’s SDG instruments in Bode Plot
3.Add MSO/Logic functionality
4. Added automatic vertical scale (volts/div) in Bode Plot mode
5.Added USB WiFi support.
6.Optimized the WiFi GUI
7.Automatic Roll mode selection will be disabled if manually disabled once.
8.Renamed Runt-Trigger in German
9.Fixed a bug in the I2C triggering system of 7 bit Address& Data
10.Improved Auto Setup function with 1K compensation output
11.Improved waveform update when using sequence mode on long timebases
12.Optimize self-calibration for Channels
History Version
SDS1004X-E firmware UpdateCurrent Version: v6.1.12 | Published:2018-02-05Download
1.This is the first version.
History Version
EasyScopeX for SDS1000X-ECurrent Version: V1.02.01.19 | Published:2018-02-05Download
Fixed bug: Need the right of administrator to install and run EasyScopeX
History Version
EasyScopeX for SDS1000X-ECurrent Version: V1.02.01.18 | Published:2017-09-22Download
History Version
SDS1000X-E Labview DriverCurrent Version: V1.0 | Published:2017-07-18Download
History Version
SDS1202X-E_firmware_UpdateCurrent Version: V1.3.13 | Published:2017-07-18Download
History Version
SDS1000X-E Labview DriverCurrent Version: V1.0 | Published:2017-07-17Download
History Version
EasyScopeX for SDS1000X-ECurrent Version: V100R001B02D01P17 | Published:2017-07-17Download
History Version
EasyScopeX for SDS1000X-ECurrent Version: V100R001B02D01P16 | Published:2017-05-23Download
History Version

Address: Antongda Industrial Zone, 3rd Liuxian Rd, Bao’an District, Shenzhen         Shenzhen ICP 09076277 © 2015 

                                     Google+  SIGLENT website -- International