製品情報
SIGLENT SSA3000Xシリーズは、9kHz~3.2GHzの周波数範囲に対応し、基礎から中級レベルのスペクトラム解析ニーズを満たします。
主な特徴
- 周波数レンジ 9 kHz ~ 2.1/3.2 GHz
- 表示平均ノイズレベル -161 dBm/Hz(標準値)
- -98 dBc/Hz @10 kHz オフセット位相雑音(1 GHz, Typ.)<
- 最小帯分解能帯域幅(RBW)< 1 Hz
- トラッキングジェネレータ(TG)標準付属
array(7) {
[17375]=>
string(56) "https://www.siglent.com/jp/products/oscilloscope/filter/"
[17384]=>
string(47) "https://www.siglent.com/jp/products/vna/filter/"
[17344]=>
string(61) "https://www.siglent.com/jp/products/spectrum_analyzer/filter/"
[11944]=>
string(56) "https://www.siglent.com/jp/products/rf-generator/filter/"
[11918]=>
string(57) "https://www.siglent.com/jp/products/arb_generator/filter/"
[17555]=>
string(56) "https://www.siglent.com/jp/products/power_supply/filter/"
[11998]=>
string(54) "https://www.siglent.com/jp/products/multimeter/filter/"
}
周波数レンジ
9 kHz -3.2 GHz
分解能帯域幅(RBW)
1 Hz ~ 1 MHz
位相ノイズ
< -98 dBc/Hz
SSA3000Xシリーズは、軽量・小型でユーザーフレンドリーなインターフェース、明るく視認性の高いディスプレイ、高い性能と信頼性を備えた自動測定、その他豊富な機能を搭載しています。研究開発や教育、生産、保守、プリコンプライアンステストといった用途に適しています。
· 帯域幅 9 kHz ~ 2.1/3.2 GHz、最小分解能帯域幅 1 Hz
· 表示平均ノイズレベル < -161 dBm/Hz、全振幅確度 < 0.7 dB
· プリアンプ、リモートコントロール機能の命令セット、PCソフトウェア「EasySpectrum」を標準搭載
· 無償のトラッキングジェネレータ、伝送特性、VSWR測定、信号電力測定、EMIプリコンプライアンステストに対応しています。
EMI診断やEMIプリコンプライアンステスト用の豊富な機能と周辺機器をサポートしています。
· テスト補償補正、プローブ、アンテナ、LISN、ケーブルの周波数特性補正
· EMI国際規格のリミットテンプレートやユーザー定義のリミットライン設定に対応
· CISPR 16に準拠したEMIフィルタと測定時間の設定に対応した準尖頭値検出器を搭載
· 放射線やケーブル、PCBといった干渉源の発見に有効なSRF5030T近接界プローブセット
· 単相デバイスの伝導妨害電圧測定用の人工電力ネットワークSEM5040Aを提供
· PCソフトウェア「EasySpectrum」によるEMIプリコンプライアンステストの自動化プロセスの完全サポート
· PCソフトウェアは、全工程のファイル構成もサポートしており、プロジェクト管理に役立ちます。
SSA3000Xシリーズはネットワークアナライザとしても使用可能です。
· トラッキングジェネレータを使用して、フィルタの伝送特性やケーブルの挿入損失を測定することができます。
· トラッキングソースと外付けの方向性結合器(RB3X25)により、アンテナやケーブルのVSWR、リターンロスの測定を実現します。
多様な無線通信信号の電力測定に対応しています。
· CHP, チャンネル電力
· ACPR, 隣接チャンネル電力比
· OBW, 占有帯域幅
· T-Power, タイムドメインパワー
· TOI, 第3次インターセプト
· スペクトラムモニタ
| 比較に追加 | 型番 | 周波数レンジ | 位相ノイズ(標準値) | 表示平均雑音レベル(DANL) | 分解能帯域幅(RBW) | トラッキングジェネレータ | 価格 |
|---|
1. Fixed “button does not respond after self test”
1. Add “PNG“ file type for screenshot.
2. Support TG in RBW less than 30 kHz.
3. Modify default TG output power, -20 dBm in spectrum ananlyzer mode and 0 dBm in
reflection measure mode, and some other TG issues.
4. Updating the format of “LIM“ file. After this firmware , the old limit files will not be
supported. You can recreate them through “EasySpectrum” free software easily.
5. After this firmware, do not support downgrade operation.
1. This firmware must be upgraded from V1.2.8.1 or later. If your SSA3000X has an
earlier version, please update to V1.2.8.1 first and then proceed to update to the
latest version.
2. Add socket/telnet-scpi, you can operate remote control through LAN port without
NI-VISA installed. Please see SSA3000X‘s Programming Guide for more details.
3. Change two limit lines in different colours.
4. When quit from TG, stay in“Auto” sweep.
5. Lower some spurs when FFT.
6. Improve the stability.
1. This firmware must be upgraded from V1.2.8.1 or later. If your SSA3000X has an
earlier version, please update to V1.2.8.1 first and then proceed to update to the
latest version.
2. Improved the stability of sweep and avg detect.
3. Fixed some bugs on sweep, frequncy counter and Log-Log scale.
4. Fixed some bugs on SCPI and the AMK option.
1. This firmware must be upgraded from V1.2.8.1 or later. If your SSA3000X has an
earlier version, please update to V1.2.8.1 first and then proceed to update to the
latest version.
2. Fixed v1.2.8.5 bugs on Refl Mode.
3. Fixed v1.2.8.5 bugs on language and file
1. This firmware must be upgraded from V1.2.8.1 or later. If your SSA3000X
has an earlier version, please update to V1.2.8.1 first and then proceed to
update to the latest version.
2. Fixed bugs on peak search and next peak.
3. Optimize SCPI commands for peak table, screenshot, etc.
4. Optimize the LOG X-scale for EMI test.
5. Optimize the Quasi-Peak detector accuracy for EMI test
Notice:
This firmware must be upgraded from v2.1.1.1 or later. If your analyzer has an earlier version, don’t use this FW to update.
Improvements:
Optimize the Ref level and Att couple
Solved Issues:
Fix the zero sweep type when fft in SA mode
Fix the OPC response in EMI mode
USB-AからUSB-B。装置とPCを接続して通信するために使用します。
装置には、ユーザーの国の規格に合致した電源コードが1本標準で付属しています。異なる地域用の追加の電源コードは別途購入できます。
装置に付属するクイックガイドです。
周波数レンジ300kHz~3GHz、分解能5mm、10mm、20mmの近傍磁界プローブ3種類(5mm、10mm、20mm)と1種類の近傍電界プローブ(5mm)です。EMI放射干渉の測定および強度検出に最適です。
高さ6U、幅482.6mm
反射ブリッジ、1MHz~2.5GHz、N(M)-N(M)×2
ポータブルソフトバッグ-S2は、SSA3000X Plus、SSA3000X、SVA1000X、SDS5000X、SDS3000X HD、SDS2000X Plusシリーズに適しています
2GHz帯域幅、長さ0.7m(27.6インチ)。
6GHz帯域幅、長さ0.7m(27.6インチ)。
6GHz帯域幅、長さ0.7m(27.6インチ)。
18GHz帯域幅、長さ1.0m
18GHz帯域幅、長さ1.0m
装置のUSBインターフェイスをGPIBインターフェイスに変換します。GPIBコマンドを使用することで、さまざまな操作タスクをより容易に実行できます。USBインターフェイスはUSB 2.0規格に準拠し、GPIBインターフェイスはIEEE 488.2規格に準拠しています。
反射ブリッジ(1MHz~2.5GHz)、Nオス-Nオスアダプタ(2個)
TG測定ソフトウェア
高度な測定ソフトウェア
EMI測定ソフトウェア
反射測定キット(ソフトウェア)
