Handheld Oscilloscope

SHS800X Series

SHS800X

Bandwidth

200 MHz

Real time sampling rate

1 GSa/s

Channels

2

SHS800X

SHS800X

Created with Pixso.

Product Introduction

SHS800X series hand-held oscilloscope has won wide recognition in the market for its high cost performance and excellent performance. This series provides bandwidth selection from 100 MHz to 200 MHz, which is suitable for various application scenarios. Its dual-channel design combines the sampling rate of 1 GSa/s and the storage depth of 12 Mpts to ensure the integrity and accuracy of the signal.
In addition, SHS800X series also integrates eight common multimeter functions, such as voltage, current and resistance, which brings users a more convenient test experience. Long battery life and compact body design make it an ideal choice for engineers to carry around.

Key Features

  • Integrated oscilloscope, serial trigger and decoder, spectrum analysis, data logger and multimeter functions into a convenient and portable design
  • 100 MHz or 200 MHz bandwidth models
  • Sampling rate of 1 GSa/s (single-channel)/500 MSa/s (two-channels)
  • Record length up to 12 Mpts
  • Waveform recording up to 22 hours
  • IP51 dust/water resistance certified

Product advantage

Five-in-one handheld oscilloscope

SHS800X series hand-held oscillograph is a multifunctional oscilloscope which integrates the functions of oscilloscope, multimeter, recorder, spectrum analysis and protocol analysis, and is widely used in research and development, production, maintenance and other fields.
Oscilloscope:Using SIGLENT SPO digital fluorescence oscilloscope technology, the refresh rate reaches 400,000 frames per second, and the digital trigger technology makes the waveform display more stable. Five decoding functions widely used in embedded and automotive serial protocols are standard.
Multi-meter:The true RMS measurement based on hardware can not only measure various parameter values, but also draw the trend chart of the measured values of oscilloscope and multimeter.
Recorder:At the sampling rate of 25 kSa/s, the waveform can be recorded and played back for up to 22 hours.

Portable and Easy to Use

The front panel size smaller than A4 paper reduces the size of the instrument, the rear panel support frame supports vertical placement, and the side nylon handles are convenient for handheld operation. The included carrying case has ample room for the instrument, probes and other accessories. Perfect for field work and carrying on business trips.

Higher protection level, longer battery life

The rechargeable 6900 mA high-capacity lithium battery is UL certified and delivers up to 5.5 hours of work without a charge, greatly improving safety and battery life. The battery can be charged in the cabin or removed and charged with an external charger.

IP51 certified

The handheld oscilloscopes feature a sealed IP51 dust and drip-proof housing and has been tested to IEC60529 to guarantee the ruggedness that is needed to survive harsh environments. A rubberized surface with large keys also makes it easy to use in difficult environments.

Product parameter

Configure your instrument

Add to Compare ModelsBandwidthChannelsVertical ResolutionSampling RateMemory DepthCapture Rate Price  

Resources

Probe (Standard)
Created with Pixso. Created with Pixso.

Product
Description
Passive probe PP510/215
Passive probe PP510/215
PP510 100 MHz
PP215 200 MHz

Other
Created with Pixso. Created with Pixso.

Probe
Created with Pixso. Created with Pixso.

Product
Description
HPB4010
HPB4010

High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF || 100MΩ.

Click to view the probe manual

DPB1300
DPB1300

High voltage differential probe, 50 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1300V, differential input impedance 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB4080
DPB4080

High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF || 54MΩ, BNC interface.

Click to view the probe manual

DPB5150
DPB5150

High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB5150A
DPB5150A

High voltage differential probe, 100 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1500V, differential input impedance 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB5700
DPB5700

High voltage differential probe, 70 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.

Click to view the probe manual.

DPB5700A
DPB5700A

High voltage differential probe, 100 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.

Click to view the probe manual

CP4020
CP4020

Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.

Click to view the probe manual

CP4050
CP4050

Current probe, DC-1 MHz bandwidth, 2X/20X attenuation ratio, maximum input 50Arms/140Ap-p, 9V adapter power supply.

Click to view the probe manual

CP4070
CP4070

Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.

Click to view the probe manual.

CP4070A
CP4070A

Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply.
Click to view the probe manual

CP6030
CP6030

Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter.

Click to view the probe manual.

CP6030A
CP6030A

Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter.

Click to view the probe manual.

CP6150
CP6150

Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual.

CP6500
CP6500

Current probe, DC-5 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual.

CPL5100
CPL5100
Current probe, DC-600 kHz bandwidth, attenuation ratio of 10X/100X, current range of 50mA ~ 100Apk, powered by 12V adapter.

Other
Created with Pixso. Created with Pixso.

Hide Created with Pixso.