Store Contact Us

Select your country/region and language

中国

中文简体

North America

Compare Selected

Back to Filter Products

                    array(7) {
  [1828]=>
  string(56) "https://www.siglent.com/na/products/oscilloscope/filter/"
  [2288]=>
  string(62) "https://www.siglent.com/na/products/spectrum-analyzers/filter/"
  [2717]=>
  string(81) "https://www.siglent.com/na/products/function-arbitrary-waveform-generator/filter/"
  [2966]=>
  string(67) "https://www.siglent.com/na/products/vector-network-analyzer/filter/"
  [3164]=>
  string(73) "https://www.siglent.com/na/products/rf-microwave-signal-generator/filter/"
  [3518]=>
  string(61) "https://www.siglent.com/na/products/dc-power-supplies/filter/"
  [4111]=>
  string(62) "https://www.siglent.com/na/products/digital-multimeter/filter/"
}

Arbitrary Waveform Generator

SDG7000A Series

SDG7000A

Max Output Frequency

1 GHz

Max Sampling Rate

5 GSa/s

Vertical Resolution

14-bit

SDG7000A

Product Introduction

As a high-performance signal source, SDG7000A series not only inherits all the advantages of SDG6000X series, but also optimizes the user interface and expansibility. Multi-channel synchronous output is supported to meet the synchronous test requirements in different scenarios. Its excellent performance and flexible configuration make it the first choice tool in scientific research and production.

Key Features

Max Output Frequency 1 GHz
High-performance sampling system with 5 GSa/s sample rate and 14 -bit vertical resolution
Dual-channel differential/single-ended output, 16-bit LVDS/LVTTL digital bus outputs (optional)
Generates vector signals with up to 500 MS/s symbol rate
The 24 Vpp analog output is superimposed with ± 12 Vdc offset to provide a maximum output range of ± 24 V (48 V)

Product advantage

Simplify Signal Creation and Accelerate Test

· SDG7000A and SigIQPro signal generation software integrate simulation, design and test to easily meet the needs of users at all stages of design, R&D, and production.
· SigIQPro is a flexible PC-based signal generation software that takes signal generation to a whole new level, supporting Bluetooth, IoT, Custom OFDM, Custom IQ, and in the future, 5G NR, LTE and WLAN, and more.
· SigIQPro is specially developed for easy generation of protocol and modulated signals, with a user interface that supports intuitive operation and provides relevant documentation that makes it easy to create standards-compliant waveforms for a wide range of applications.
· TRY BEFORE YOU BUY! SigIQPro provides 30 free trials of each feature for unrestricted use of the functions with your existing compatible signal generators.
• SigIQPro_UserManual
• Click to view more about SigIQPro signal generation Software
• Click to download SigIQPro signal generation Software

Multi-functional Waveform Generator

SDG7000A series integrates multiple waveform generator functions from DC to continuous waves up to 1 GHz, which can replace RF signal generators in some applications. It adopts Siglent’s TrueArb point-by-point arbitrary waveform generation technology, which enables user-adjustable output sample rates from 0.01 Sa/s to 2.5 GSa/s with excellent jitter performance and the generation of I/Q vector signals with a maximum settable bandwidth greater than 500 MHz. Using the benefits of Siglent’s EasyPulse architecture, a low jitter pulse with a minimum pulse width of 1 ns can be generated.

Wide Range Amplitude Output

24Vpp analog output superimposed with ± 12 Vdc offset, providing a maximum output range of ± 24 V (48 V).

Excellent Arbitrary Waveform Generation

AFG Mode uses traditional DDS technology to generate arbitrary waveforms

AWG Mode uses the innovative TrueArb technology, with an adjustable sample rate from 0.01 Sa/s~ 2.5 GSa/s and jitter less than 20 ps. It not only has all the advantages of traditional DDS technology, but also overcomes its intrinsic jitter and distortion defects.

The flexible platform also provides zero order hold, linear and sinc interpolation methods for increased flexibility when creating complex waveforms.

High-Speed Low Jitter Pulse

Low jitter When a Square/Pulse waveform is generated by traditional DDS, there can be additional jitter if the sample rate is not an integer-related multiple of the output frequency. EasyPulse technology successfully overcomes this weakness in DDS designs and helps to produce low jitter Square/Pulse waveforms.

High speed The minimum 1 ns pulse width, can be generated at any frequency. The pulse width can be finely adjusted in steps of 10 ps.

Vector Signal Output (Optional)

The SDG7000A can generate common modulation types of IQ signals, such as ASK, FSK, PSK, QAM. With the innovative resampling technology, excellent EVM performance can be obtained at any symbol rate between 250 S/s ~ 500 MS/s. The built-in digital quadrature modulator can modulate the carrier of the IQ signal to any frequency between 0 Hz~1 GHz. The software can be used to generate and edit various types of IQ signals.

Product parameter

View All Parameters

Configure your instrument

Options

Accessories

Models

Add to Compare	Models	Max Output Frequency	Max Sampling Rate	Vertical Resolution	Waveform Length	Channels	Price

Resources

Document Download

Firmware & Software

Application Notes

Video

Help Center

Document Download

Firmware & Software

Application Notes

Video

Help Center

Standard Accessories
Optional Accessories
Options
Downloads

Universal accessories

Product

Description

USB Cable

USB-A to USB-B. Used to connect instrument to PC for communication.

wireless mouse

A wireless mouse comes standard to help you improve your operating experience.

Power cord

The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.

BNC Coaxial Cable

Double BNC connector coaxial cable

SDG7000A Quick Start

Quick start operation guide

Universal accessories

Product

Description

10M_OCXO_L

OCXO timebase (Assembled and calibrated in factory only)

When purchasing, determine whether installation is required.

USB-GPIB Adapter

Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard.

SPA1010 Power Amplifier

SPA1010 The power amplifier can be matched with Dingyang full series function/arbitrary waveform generator products to realize the power amplification of its signal output.