Function/Arbitrary Waveform Generator

SDG2000X Series

SDG2000X

Max Output Frequency

120 MHz

Max sampling rate

1.2 GSa/s

Vertical Resolution

16 bit

SDG2000X

SDG2000X

Created with Pixso.

Product Introduction

SDG2000X series has a frequency of 120MHz, supports arbitrary wave length up to 8Mpts, and can meet the requirements of waveform generation with high precision and complexity.

Key Features

  • Dual-channel, 120 MHz maximum bandwidth
  • 1.2 GSa/s Sampling rate, 16 bit vertical resolution
  • TrueArb technology, Arbitrary wave length 8 – 8 Mpts
  • Low jitter square and pulse wave;Pulse width and rise/fall time finely adjustable

Product advantage

Excellent Channel Performance

SDG2000X features high performance dual-channel and high signal fidelity

· Maximum output frequency 120 MHz
· High amplitude output at high frequencies. 20 V signal output capability at 20 MHz
· Extremely low noise floor, high signal to noise ratio

Innovative EasyPulse technology

With traditional DDS technology, there will be a jitter of one sampling period when sampling rate and output frequency are not integer multiple. With EasyPulse technology, this can be solved perfectly. In addition to output low jitter Square and Pulse signals, EasyPulse tech has advantages of:

· Pulse frequency up to 25 MHz
· The rise and fall time can be set separately, fastest 8.4 ns
· Pulse width finely adjustable, down to 16.3 ns
· Duty cycle as low as 0.001%
· Low jitter

TrueArb Technology

TrueArb technology has advantages of low jitter and low distortion over traditional DDS technology. TrueArb technology features by output arbitrary waveforms point by point. It will not leak any waveform info and has other advantages:

· 8 Mpts arbitrary waveform length, keep more details
· 16 bit vertical resolution, higher signal fidelity
· Generate and output arb wave per customer request with standard PC software EasyWave

Complex Signal Generation Capability

The SDG2000X can perform various kinds of modulations, sweeps, burst and signal synthesis. It supports internal, external and manual trigger sources.

· Support AM, FM, PM, FSK, ASK, PSK, DSB-AM and PWM modulations
· Support linear and logarithmic sweeps.
· Support “N cycle” and “Gate” burst mode
· Support output combined waveforms of two channels. Combine signals with noise, modulated signal, sweep, burst and arbitrary waveform
· 谐Harmonic function can simulate the synthesis process of signals

Product parameter

Comparative Data SDG2000X Keysight 33600A
Sine Output 1 μHz - 40/80/120 MHz 1 μHz - 80/120 MHz
Channels 2 1/2
Sample Rate 1.2 GSa/s 660 MSa/s - 1 GSa/s
Vertical Sensitivity 16-bit 14-bit
Frequency Resolution 1 μHz 1 μHz
Arbitrary Waveform Length 8 pts- 8 Mpts 4 Mpts,32 Mpts(Optional)
Point by Point Arb Output Support,TrueArb Technology Support,Trueform Arb
Interface USB Host & Device,LAN,GPIB(Optional) USB、LAN、GPIB (Optional)
Display 4.3 inch touch screen 4.3 inch
Price $574 ~ $4,506 ~

*Note:The above prices and parameters were collected in official website on July 19th, 2019. In case of any discrepancy, the official website shall prevail.

Configure your instrument

Add to Compare ModelsMax Output FrequencyMax Sampling RateVertical ResolutionWaveform LengthChannels Price  

Resources

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
USB Cable
USB Cable

USB-A to USB-B. Used to connect instrument to PC for communication.

Power cord
Power cord

The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.

BNC Coaxial Cable
BNC Coaxial Cable

Double BNC connector coaxial cable

SDG2000X Quick Start
SDG2000X Quick Start

Quick-use guide as standard for the instrument.

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
USB-GPIB Adapter
USB-GPIB Adapter

Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard.

SPA1010 Power Amplifier
SPA1010 Power Amplifier
SPA1010 The power amplifier can be matched with Dingyang full series function/arbitrary waveform generator products to realize the power amplification of its signal output.
20dB Attenuator
20dB Attenuator
Used for 20dB attenuation of signal power output by signal source, BNC connector
SDG/SDM-RMK Rack installation
SDG/SDM-RMK Rack installation
The rack mounting option is designed to mount the instrument to the standard 19-inch rack specified by EIA, and it is compatible with Dingyang full series SDG function/arbitrary waveform generator and SDM series digital multimeter.
Hide Created with Pixso.