Created with Pixso. Store Contact Us Created with Pixso.
Created with Pixso.
Trial
Created with Pixso.
Resource Center
Created with Pixso.
Issue Reporting
Created with Pixso.
Customer Service
Created with Pixso. Store Contact Us
Created with Pixso.

Function/Arbitrary Waveform Generator

SDG1000X Series

SDG1000X

Max Output Frequency

60 MHz

Max sampling rate

150 MSa/s

Vertical Resolution

14 bit

Created with Pixso.
Created with Pixso.
Created with Pixso. Quote
Created with Pixso. Datasheet

SDG1000X

SDG1000X

Created with Pixso.

Product Introduction

The SDG1000X series has a frequency as high as 60MHz and a sampling rate of 150 MSa/s, which ensures accurate waveform reproduction. Users can also create complex waveform sequences through the sequence function to meet complex test requirements.

Key Features

  • Dual-channel, with maximum 60 MHz Square and Sine wave output frequency
  • 150 MSa/s Sampling rate, 14 bit vertical resolution
  • TrueArb technology, Arbitrary wave length 2 ~ 16 kpts
  • Pulse width and rise/fall time finely adjustable
  • Complex signal synthesis
  • 4.3” TFT-LCD display

Product advantage

High Quality Square Wave

The SDG1000X break the 60 MHz channel bandwidth limit and achieve a high performance square wave with a dedicated square wave generation circuit.

· The SDG1000X series has a bandwidth of 60 MHz, but can output a high-performance square wave of 60 MHz.
· Rise/fall time is less than 4.2 ns
· Square wave has the equivalent jitter performance with pulse wave

Innovative EasyPulse technology

With traditional DDS technology, there will be a jitter of one sampling period when sampling rate and output frequency are not integer multiple. With EasyPulse technology, this can be solved perfectly. In addition to output low jitter Square and Pulse signals, EasyPulse tech has advantages of:

· Pulse frequency up to 12.5 MHz
· The rise and fall time can be set separately, fastest 16.8 ns
· Pulse width finely adjustable, down to 32.6 ns
· Duty cycle as low as 0.001%
· Low jitter

TrueArb Technology

TrueArb technology has advantages of low jitter and low distortion over traditional DDS technology. TrueArb technology features by output arbitrary waveforms point by point. It will not leak any waveform info and has other advantages :

· 16 kpts arbitrary waveform length, keep more details
· 14 bit vertical resolution, higher signal fidelity
· Generate and output arb wave per customer request with standard PC software EasyWave

Complex Signal Generation Capability

The SDG1000X can perform various kinds of modulations, sweeps, burst and signal synthesis. It supports internal, external and manual trigger sources.

· Support AM, FM, PM, FSK, ASK, PSK, DSB-AM and PWM modulations
· Support linear and logarithmic sweeps
· Support “N cycle” and “Gate” burst mode
· Support output combined waveforms of two channels. Combine signals with noise, modulated signal, sweep, burst and arbitrary waveform
· Harmonic function can simulate the synthesis process of signals

Product parameter

View All Parameters
Created with Pixso.

Configure your instrument

Created with Pixso.
Options
Created with Pixso.
Accessories

Models

Add to Compare ModelsMax Output FrequencyMax Sampling RateVertical ResolutionWaveform LengthChannels Price  

Resources

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
USB Cable
USB Cable

USB-A to USB-B. Used to connect instrument to PC for communication.

Power cord
Power cord

The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.

SDG1000X Quick Start
SDG1000X Quick Start

Quick-use guide as standard for the instrument.

BNC Crocodile clip cable
BNC Crocodile clip cable

One BNC to alligator clip cable is provided as standard.

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
USB-GPIB Adapter
USB-GPIB Adapter

Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard.

SPA1010 Power Amplifier
SPA1010 Power Amplifier
SPA1010 The power amplifier can be matched with Dingyang full series function/arbitrary waveform generator products to realize the power amplification of its signal output.
20dB Attenuator
20dB Attenuator
Used for 20dB attenuation of signal power output by signal source, BNC connector
BNC Coaxial Cable
BNC Coaxial Cable

Double BNC connector coaxial cable

SDG/SDM-RMK Rack installation
SDG/SDM-RMK Rack installation
The rack mounting option is designed to mount the instrument to the standard 19-inch rack specified by EIA, and it is compatible with Dingyang full series SDG function/arbitrary waveform generator and SDM series digital multimeter.
Created with Pixso.
Contact Us
400-878-0807
Created with Pixso.
Help Center
Created with Pixso.
Support

SIGLENT Store

After signing up, you can purchase products in the online store and enjoy membership benefits such as occasional discounts and promotional offers.

Shop Now Created with Pixso.
Hide Created with Pixso.
Created with Pixso. Help