Signal Generation Software

SigIQPro

Product Introduction

SigIQPro is a flexible PC-based signal generation software that takes signal generation to a whole new level. SIGLENT instruments and SigIQPro signal generation software integrate simulation, design and test to easily meet the needs of users at all stages of design, R&D, and production. SigIQPro is specially developed for easy generation of protocol and modulated signals, with a user interface that supports intuitive operation and provides relevant documentation that makes it easy to create standards-compliant waveforms for a wide range of applications, as well as support for downloading signal files to the SIGLENT signal generators for playback.

Key Features

Bluetooth BR/EDR/LE
IEEE 802.15.4 O-QPSK BPSK (ZigBee)
IEEE 802.15.4 SUN FSK/OFDM
ITU-T G.9959 (Z-WAVE)
5G NR Release 17
LTE FDD/TDD Release 17
GSM/EDGE
WCDMA/HSPA+
802.11 b/g/a/n/ac/ax/be
Custom OFDM

Product advantage

5G NR

Support the generation and download of cellular protocol standard signals conforming to 3GPP 5G NR specifications, covering 5G NR FR1/FR2-1/FR2-2 frequency bands.
Parameter preset of NR reference measurement channel (RMC), fixed reference channel (FRC) and Test Model defined by 3GPP standard.
Support NTN (non-terrestrial network) test mode preset in accordance with 3GPP NR-NTN specification, including RMC\FRC\Test Model test mode.
Parameter configuration supporting single-carrier and multi-carrier signals
Support the generation of complex scene signals, and can add parameters such as phase noise and frequency offset to simulate real channel environment
Support the multi-channel configuration of downlink PDC \ PUCH \ CSI-RS and uplink PUCH \ PUCH \ SRS, and support the PRACH and downlink SS\BPCH Block channels.

LTE/LTE-A FDD/TDD

Support the generation and download of signals conforming to 3GPP LTE and LTE-A specifications, and has undergone strict verification and performance optimization
Support E-UTRA test model (E-TM) predefined settings conforming to the latest 3GPP protocol
Support predefined settings of PUCCH test model conforming to the latest 3GPP protocol
Support fixed reference channel (FRC) predefined settings in line with the latest 3GPP protocol
Support the predefined setting of reference measurement channel (RMC) conforming to the latest 3GPP protocol

IEEE 802.11b/a/g/n/ac/ax/b

Strictly follow the IEEE 802.11ax(Wi-Fi 6) and 802.11be(Wi-Fi 7) standards to generate high-precision reference signals, which are strictly verified and optimized
Flexible allocation of OFDMA resource units (RUs) is supported, and RU types such as 26/52/106/242/484/996-tone are dynamically allocated to meet the needs of multi-user scenarios and spectrum fragmentation
Support 20/40/80/160/320MHz bandwidth and discontinuous channel aggregation, and is compatible with 20MHz subchannel Puncturing to maximize spectrum utilization
Support BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM and 4096QAM modulation and dual-carrier aggregation modulation (DCM) to improve single-stream rate and anti-interference ability
Support BCC (Binary Convolutional Code) and LDPC (Low Density Parity Check Code), covering 1/2 to 5/6 coding rate

Bluetooth

Create signals for BR, EDR, LE specifications
Support 2 Ms/s symbol rate for higher data rate
Basic and enhanced data rate modulated data streams
Fully-coded Bluetooth packets with 2-DHx, 2-EVx, 3-DHx, and 3-EVx packet types

IOT

A principally outdoor, low data rate wireless network
Typically employ mesh or peer-to-peer multi-hop technology to communicate with an access point
Create signals for IEEE 802.15.4 SUN FSK and IEEE 802.15.4 SUN OFDM specifications
Basic and enhanced data rate modulated data streams
Create signals for IEEE 802.15.4 O-QPSK / BPSK ZigBee and ITU-T G.9959 FSK / GFSK Z-Wave specifications

Custom OFDM

Quickly establish customized modulation configuration：11a-1999，LTE Downlink
Customizable time-frequency resource mapping and transmission Payload bit sequence
Support spectrum and power control based on customizable baseband filter, peak clipping and window function.

Toolkit

A file conversion tool, compatible with conversion of various data formats
Export waveform files (*.arb), project file (*.project) or state files (*.state)
Import SIGLENT encrypted waveforms (*.arb) or user defined waveforms ( *.txt/.csv/.dat, *.mat, *.project, *.state, etc)

SIGLENT Bluetooth signal generation and signal analysis solution

Together with SigIQPro signal generation software and SDG7000A/SSG5000X-V, SSA5000A forms an economical
and efficient SIGLENT Bluetooth signal generation and signal analysis solution,
which accelerates the process from signal generation to data information to evaluation conclusion.