Spectrum Analyzer

SSA3000X Series

SSA3000X

Frequency Range

9 kHz -3.2 GHz

Resolution Bandwidth

1 Hz ~ 1 MHz

Phase Noise

< -98 dBc/Hz

SSA3000X

SSA3000X

Created with Pixso.

Product Introduction

SSA3000X series covers the frequency range from 9 kHz to 3.2 GHz, which is suitable for spectrum analysis from basic to mid-range.

Key Features

  • Frequency Range from 9 kHz to 2.1/3.2 GHz
  • -161 dBm/Hz Displayed Average Noise Level (Typ.)
  • -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)<
  • Amplitude Accuracy<0.7 dB
  • 1 Hz Minimum Resolution Bandwidth (RBW)

Product advantage

Economical Spectrum Analyzer with Excellent Performance

With their light weight, small size, and friendly user interface, the SSA3000X present a large, bright easy to read display, powerful and reliable automatic measurements, and plenty of impressive features. Applications include research and development, education, production, maintenance, and pre-compliance testing.

· Bandwidth 9 kHz to 2.1 GHz / 3.2 GHz, minimum resolution bandwidth 1 Hz
· Display average noise level below -161 dBm/Hz, full amplitude accuracy better than 0.7 dB
· Standard preamplifier, remote control instruction set, EasySpectrum PC software
· Free tracking generator, transmission response, VSWR measurement, signal power measurement, EMI pre-compliance test

Low-cost EMI Pre-compliance Solution

Extensive features and accessory support for EMI diagnostics and EMI pre-compliance testing, including:

· Test compensation Correction, frequency response compensation for probe, antenna, LISN, cable
· Support Limit line , Including EMI international standard limit template, or user-defined limit line
· Compliant CISPR 16 EMI filter and quasi-peak detector for quasi-peak measurement dwell time
· Support SRF5030T near-field probe set to find interference sources for radiation, cables, PCBs, etc.
· Provide SEM5040A artificial power network for single-phase device conducted disturbance voltage measurement
· EasySpectrum PC software, supports complete EMI pre-compliance test automation implementation process
· The PC software also supports the file configuration of the whole process, which is convenient for project management.

SWR and Transmission Response Measurement

The SSA3000X can be used as a network analyzer:

· With the tracking generator, the filter transmission response and the cable insertion can be measured
· With tracking source and external directional coupler (RB3X25), it can measure antenna and cable standing wave ratio VSWR, return loss

Abundant Power Measurement

With variety of wireless communication signal power measurement capabilities:

· CHP, Channel Power
· ACPR, Adjacent Channel Power Ratio
· OBW, Occupied Bandwidth
· T-Power, Time Domain Power
· TOI, Third-Order Intercept
· Spectrum Monitor

Product parameter

Configure your instrument

Add to Compare ModelsFrequency RangePhase Noise(typ.)Display Average Noise Level (DANL)Resolution Bandwidth (RBW)Tracking Generator Price (Tax Not Included)  

Resources

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
USB Cable
USB Cable

USB-A to USB-B. Used to connect instrument to PC for communication.

SSA3000X Quick Guide
SSA3000X Quick Guide

Quick guide included with the instrument.

TG-SSA3000X
TG-SSA3000X

TG measurement software

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
SRF5030T
SRF5030T

Three magnetic field near-field probes (5 mm, 10 mm, 20 mm) and one electric field near-field probe (5 mm) with frequency range of 300 kHz ~ 3 GHz and resolution of 5 mm, 10 mm, 20 mm are suitable for EMI radiation interference and intensity detection.

Click to view the calibration kit manual

RB3X25
RB3X25

Return Loss Bridge (1 MHz to 2.5 GHz), N-type(M) to N-type(M) adaptor (2 pcs) for measuring VSWR with the SSA3000X and SSA3000X Plus series of spectrum analyzers.

NOTE: On-screen VSWR calculations require the activation license for Reflection/VSWR for the specific analyzer you wish to use. This part number includes hardware only.

RBSSA3X25
RBSSA3X25

Full kit for measuring VSWR with the SSA3000X series of spectrum analyzers.

Includes: Activation license for Reflection/VSWR kit (SSA3000X-REFL), Return Loss Bridge (1 MHz to 2.5 GHz), N-type(M) to N-type(M) adaptor (2 pcs)

UkitSSA3X
UkitSSA3X

Reflection bridge, 1 MHz to 2.5 GHz; 2 x N(M)-N(M)

Click to view the RF cable and connector manual

N-BNC-2L
N-BNC-2L

2 GHz bandwidth, Length 0.7 m (27.6 inches)

Click to view the RF cable and connector manual

N-N-6L
N-N-6L

6 GHz bandwidth, Length 0.7 m (27.6 inches)

Click to view the RF cable and connector manual

N-SMA-6L
N-SMA-6L

6 GHz bandwidth, Length 0.7 m (27.6 inches).

Click to view the RF cable and connector manual

N-N-18L
N-N-18L

18 GHz bandwidth, Length 1.0 m

Click to view the RF cable and connector manual

N-SMA-18L
N-SMA-18L
SSA-RMK Rack mounting kit
SSA-RMK Rack mounting kit

6U high 482.6 mm wide

Portable soft BAG-S2
Portable soft BAG-S2

Portable soft BAG-S2,suitable forSSA3000X Plus, SSA3000X, SVA1000X,SSA1000X,SDS5000X,SDS3000X HD,SDS3000X,SDS2000X,SDS2000X Plus series

Other
Created with Pixso. Created with Pixso.

Product
Description
EMI-SSA3000X
EMI-SSA3000X

EMI measurement software

AMK-SSA3000X
AMK-SSA3000X

Advanced measurement software

SSA3000-Refl
SSA3000-Refl

Unlocks the Reflection/VSWR option for the SSA3000X and the SSA3000X Plus series of Spectrum Analyzers.
Requires an external return loss bridge or SIGLENT RBSSA return loss bridge for full functionality.

Hide Created with Pixso.