1. Optimize Autosetup speed
2. Optimize SDS1104X-E bandwidth
3. Standard software functions of FG, LA and WIFI

Optimized VGA configuration

Compatibility between Versions

Source Version Object Version Compatibility
6.1.37R9 6.1.37R10 Yes
6.1.37R8 6.1.31R10 Yes
6.1.37R6 6.1.37R10 Yes
6.1.37R2 6.1.37R10 Yes
6.1.26 6.1.37R10 Yes
6.1.25R2 6.1.37R10 Yes
6.1.25R1 6.1.37R10 Yes
6.1.20R1 6.1.37R10 Yes
6.1.20 6.1.37R10 Yes
6.1.12R1 6.1.37R10 Yes
6.1.12 6.1.37R10 Yes
6.1.33 6.1.37R10 Yes
6.1.35R2 6.1.37R10 Yes

Compatibility with SLA1016

Source Version Object Version Compatibility

8.1.16 6.1.33/6.1.37R10 Yes
8.1.11 6.1.33/6.1.37R10 No
8.1.9 6.1.33/6.1.37R10 No
8.1.8 6.1.33/6.1.37R10 No

Update instructions

Important!
Because 6.1.33 fixed a bug with self- calibration for each channel. Please perform a self-calibration if the machine is updated to 6.1.33 (or higher)
Very important!
Optimized communication between SDS1xx4X-E and SLA1016. If the SDS1xx4X-E will be upgraded to this version (or higher), the SLA1016 MUST be upgraded to 8.1.16 (or higher) first.
Very important!
Because 6.1.20R1 fixed a bug with self- calibration for each channel, immediately perform a self-calibration if the machine is updated to 6.1.20R1 (or higher)

Fixed the problem: The skew of the two ADCs is not
accuracy for hardware of 09 version (System Status shows
Hardware Version: 09-xx). The other hardware version has
no this problem.

1. Fixed the problem: very few SDS1xx4X-e stuck at self-
   calibration
2. Be Compatible with a new VGA chip

1. Fixed the bug in 6.1.37R2 which cause the WiFi does not
work

1. 1. Added data logger featuring Sample and Measurement
   Logger functions
2. 2. Added counter function
3. 3. Added Labels
4. 4. Added NTP (Network Time Protocol) and Time Zone. Also
   requires OS update to SDS1xx4X-E_OSV2 which is located
   on the SIGLENT product webpage. The OS Update
   Instructions is also included SDS1xx4X-E_OSV2.zip
5. 5. Modified negative or positive of horizontal delay: Time
   zero is in trigger. Before trigger, time position is -time
   (negative delay relative to trigger) and after trigger is
   +time (positive delay relative to trigger)
6. 6. Fixed a bug with Bin2CSV for ROLL mode
7. 7. Rebuilt Bin2CSV to File Converter which can also convert
   data logger file to CSV.
8. 8. Fixed a bug: some case there is a blue line on decode bus
9. 9. Fixed a bug with saving hex MSO CSV file
10. 10. Fixed a bug: After rebooting , Bode Plot cursor can’t be
    moved
11. 11. Fixed a bug: fine adjusting with customer probe
12. 12. WiFi supported Spaces and Special Characters