High resolution oscilloscope

SDS3000X HD Series

SDS3000X HD

Bandwidth

1 GHz

Real time sampling rate

4 GSa/s

Channels

4 + EXT

SDS3000X HD

Product Introduction

SDS3000X HD series oscilloscopes are one of the classic products of Siglent. The bandwidth ranges from 1 GHz to 350 MHz, providing 4 channels plus expansion options. Its sampling rate is as high as 4 GSa/s and waveform capture rate is 890,000 wfm/s, which ensures the real-time and accuracy of signal capture. The high-resolution display in HD mode makes the waveform details clearer, which is suitable for the diversified needs of electronic R&D and education.

Key Features

Bandwidth：1 GHz、500 MHz、350 MHz
Memory depth： Up to 400 Mpts/ch
ADC：12-bit
Real time sampling rate： Up to 4 GSa/s
Waveform Capture rate：Up to 890,000 wfm/s
Low background noise: 125 μVrms @ 1 GHz bandwidth

Product advantage

12-bit ADC：waveform details are clearly visible

SDS3000X HD series oscilloscopes are equipped with 12-bit high-resolution ADC, with quantization level up to 4096, and the resolution can be increased to 16-bit in high-resolution mode (ERES), which together with the vertical and horizontal zoom functions, helps users observe the details of waveforms in a more complete and clearer way.

ENOB - Effective Number of ADC Bits

When a high-speed ADC performs data acquisition, the signal-to-noise-to-distortion ratio of the actual ADC falls short of the desired performance that its nominal number of bits should achieve due to noise and distortion. Since the ADC is only a part of the oscilloscope system and cannot be used independently, the ENOB indicator of the whole oscilloscope system will be more meaningful.
SDS3000X HD is up to 8.3 to 8.6-bit, with less time error and frequency spuriousness, which can effectively ensure the accuracy of measurement.

Multiple trigger types

SDS3000X HD series oscilloscopes provide a variety of trigger types, including edge, interval, video, serial bus, area triggering, etc. Among them, area triggering is different from traditional triggering, which can be applied to episodic signals whose parameter characteristics are not yet clear, and the signal capture can be completed by creating and defining an area using only the mouse or touch.
Bus trigger supports I2C, SPI, CAN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and other buses, providing test solutions for embedded, automotive, computer and other serial buses.

模板测试，高效评估信号质量

模板测试功能主要用于信号质量的评估，能够长时间监控波形的故障率，并根据故障波形定位原因。有两种规则设置方式，一是通过在示波器中绘制多边形模板创建规则，二是根据“完美波形”设置水平和垂直数值创建规则，而后示波器对波形进行实时测试，可统计在规定的测试条件内测试的次数、失败的次数、失败率等，还能够设置“存储失败帧”，失败波形可通过历史模式进行查看。

Power analysis：quickly get power parameters

SDS3000X HD can be equipped with optional power supply analysis function, together with Siglent’s voltage probes (e.g., DPB5000 series) and current probes (e.g., CP6000 series), it can quickly and accurately analyze 12 parameters of power supply such as power quality, current harmonics, inrush current, transient response, etc.
For example, to improve the efficiency of the power supply by minimizing switching loss, to evaluate the working stability of the device by counting the probability that the power device transients exceed the safe working zone under all working conditions.

50MHz waveform generator

SDS3000X HD can be directly connected to the waveform generator SAG1021I via the USB interface. With a sampling rate of 125MSa/s and 14-bit resolution, the SAG1021I provides predefined waveform outputs of up to 50MHz, including sine, square, triangle, pulse, noise, DC, and 45 built-in arbitrary waveforms.
Users can also edit arbitrary waveforms through the EasyWave host computer software. The plug-and-play nature of the SAG1021I allows users to quickly and easily set up tests for a wide range of scientific experiments and industrial control applications.

Product parameter

View All Attributes

Configure your instrument

Options

Accessories

Models

Add to Compare	产品型号	模拟带宽	通道数	垂直分辨率	最高实时采样率	最大存储深度	最高波形捕获率	Price

Resources

Document Download

Firmware & Software

Study Center

Application Notes

Document Download

Firmware & Software

Study Center

Application Notes

Standard Accessories
Optional Accessories
Options
Related Downloads

Probe (Standard)

产品

描述

SP3050A

无源探头，500 MHz带宽，10X衰减比，输入阻抗11pF || 10MΩ, 带自动识别功能

点击查看探头手册

Other

产品

描述

USB数据线

USB数据线，用于仪器与PC通信。使用前，需要在PC端安装NI-VISA驱动。

电源线

仪器标配一根符合用户所在国家标准的电源线。不同地区的附加电源线可以单独购买。

SDS3000X HD快速指南

标配一本快速指南

Probe (Standard)

产品

描述

SPL2016

16路逻辑探头(硬件)，采样率及存储深度由示波器决定，适用于鼎阳科技SDS7000A，SDS6000 Pro，SDS6000L，SDS5000X HD，SDS5000X，SDS3000X HD，SDS2000X HD，SDS2000X Plus机型

点击查看探头手册

SAP系列有源单端探头

SAP1000：1 GHz有源单端探头；
SAP2500：2.5 GHz有源单端探头

点击查看探头手册

HPB4010

高压探头，DC-40 MHz带宽，1000X衰减比，输入阻抗3pF || 100MΩ。

点击查看探头手册

高压差分探头

DPB5150 / DPB5150A / DPB5700 / DPB5700A / DPB1300 / DPB4080 带宽范围：50 MHz~100 MHz

更多探头资料，请点击查看《DPB4000~5000高压差分探头明书》、《DPB1300高压差分探头说明书》

CPL5100

电流探头，DC-600 kHz带宽，10X/100X衰减比，电流范围50mA ~ 100Apk，12V适配器供电。

点击查看探头手册

SAP2500D

有源差分探头，2.5 GHz带宽，10X衰减比，差分输入阻抗1pF || 200kΩ，偏置范围±8V，SAPBus接口

点击查看探头手册

电流探头

CP4020/CP4050/CP4070/CP4070A/CP6030/CP6030A/CP6150/CP6500

点击查看探头手册

SCP5000电流探头

电流探头

点击查看探头手册

SAP4000P

电源轨探头，DC-4 GHz带宽，1.1X衰减比，输入动态范围±600mV，偏置范围±24V，SAPBus接口

点击查看探头手册

ODP6000B

ODP6000B系列光隔离探头，带宽500 MHz、1 GHz，直流精度≤±1%，测量电压范围2.5V~2500V，隔离电压±60kV，光缆长度约2米，支持自动校准。

点击查看探头手册

DPB6150

DPB6150A带宽100 MHz，DPB6150D带宽400 MHz，直流精度±2%，低上升时间，高共模抑制比，BNC接口，适用于鼎阳SDS6000 Pro、SDS5000X HD、SDS3000X HD、SDS2000X HD、SDS1000X HD、SDS1000X EDU、SDS800X HD、SDS800X EDU等系列示波器。

点击查看探头手册