SDS6000L series oscilloscopes focus on cost performance, with a bandwidth of 500 MHz to 2 GHz, and also have excellent 12-bit vertical resolution. Combined with high sampling rate, deep storage and rich functions, such as template testing and power analysis, it is suitable for routine testing tasks in electronic design and manufacturing and meets the daily needs of most engineers.
Key Features
Supports up to 512 analog channels.
Up to 2 GHz bandwidth with 5 GSa/s (10 GSa/s ESR) sample rate at each channel
Waveform capture rate up to 750,000 wfm/s (Sequence mode)
SYNC-64 to Synchronize 64 x SDS6000L
Product advantage
Complete Connectivity
Interfaces include: HDMI (1280 x 800) x1, USB Host 3.0 x2, USB Host 2.0 x2, USB Device 2.0 (USBTMC) x1, 1000M LAN (VXI-11 / Telnet / Socket)x1, micro SD card x1, Auxiliary output (Pass / Fail, Trigger Out) x1, 10 MHz In x1, 10 MHz Out x1
Eye diagram and jitter analysis
The SDS6000L Series can automatically extract the embedded reference clock from serial data and create an eye diagram. Measurement on multiple eye / jitter parameters is provided and mask testing of eye diagrams is supported.
High Waveform Update Rate
The waveform update rate of SDS6000L is up to 170,000 wfm/s, which can easily capture unusual or low-probability events. In Sequence mode, the waveform capture rate can reach 750,000 wfm/s.
12-bit ADC to meet the requirements of higher precision testing
High-resolution oscilloscope can effectively improve the accuracy of signal measurement. The quantization level of the traditional 8-bit resolution oscilloscope is 256, while the quantization level of the 12-bit resolution is 4096, which means that the minimum signal amplitude that can be measured under 12-bit is 1/4096V, while that of 8-bit is only 1/256 V.. The resolution of 12-bit can reach 16 times that of the traditional 8-bit, which improves the measurement accuracy of the signal by an order of magnitude.
High-resolution oscilloscopes require extremely high noise floor, otherwise small signals will be easily submerged in noise. The noise floor of SDS6000L is only 153 μVrms, and its DC gain accuracy can reach 0.5%, which enables 12-bit ADC to give full play to its performance and enables users to observe more waveform details.
Flexible Multi-channel High-speed Acquisition System
· Standard sizes: 4 – channel models – 1U,8-channel models – 2U · Multiple units are combined to create a high-speed acquisition system with up to 512 channels by being triggered with low-skew synchronization signals from the 64-channel synchronization distributor SYN64 · The host can access each unit over 1000M LAN. A complete SCPI command set as well as LabVIEW and IVI drivers are provided for easy data acquisition. The LAN port is LXI compliant · Sample clocks are synchronized between all units in the test system by cascading the 10 MHz In and 10 MHz Out clocks in a daisy chain
1. Fixed several bugs
a) Cannot exit from Bode plot in some case
b) Cannot detect active probes correctly when the probes are connected at power-on
c) “Set to 50% level” takes the scope frozen in some case
d) Sample rate is displayed incorrectly after reboot from Fixed Memory Length mode
2. Measure:
a) Added item: UpperLower
b) Added Source: ZFx, ZMx
c) Supported zoom in the measure histogram
3. Cursors: Supported to hide Y cursors in track mode
4. Math:
a) Supported up to 8 traces
b) Added operators: Envelope, tan, atan, FFT Phase
c) FFT：peak added delta display; marker added ordering by number, amplitude and frequency
d) FFT：Added windows Blackma_Harris and Gaussian
e) Supported to hide traces
5. Analysis：
a) SignalScan added decode search
b) Eye Diagram: added Vpp measurement
6. REF: Supported to hide traces
7. Zoom:
a) ZFx supported to set horizontal scale independly; ZFx, ZMx supported to synchronize the display region with Zx
b) Supported to set Zx’ vertical scale with unified adjustment
8. Roll：
a) Supported decode in Stop mode
b) Supported Roll + Zoom in fast display mode
9. Prode: Supported CP150, HVD3106A; Supported to set external scaling of SAP2500D
10. Save/Recall:
a) Autosave supported to save pictures
b) Supported to save all channels’ data to a single file
c) FileManager：Supported to view a picture in full screen mode
11. Display:
a) Axis label supported to set the vertical label on center and right
b) Supported to change the font size
