Created with Pixso. Store Contact Us Created with Pixso.
Created with Pixso.
Trial
Created with Pixso.
Resource Center
Created with Pixso.
Issue Reporting
Created with Pixso.
Customer Service
Created with Pixso. Store Contact Us
Created with Pixso.

Digital Oscilloscopes

SDS5000X Series

SDS5000X

Bandwidth

1 GHz

Real time sampling rate

5 GSa/s

Channels

2/4 + EXT

Created with Pixso.
Created with Pixso.
Created with Pixso. Quote
Created with Pixso. Datasheet
Created with Pixso. Video

SDS5000X

SDS5000X

Created with Pixso.

Product Introduction

SIGLENT SDS5000X series digital oscilloscopes are designed for high-performance testing needs. The series offers an analog bandwidth of 350 MHz to 1 GHz, a sampling rate of up to 5 GSa/s, and a memory depth of 250 Mpts to ensure the capture of fine signal details. Supporting a wide range of advanced features such as baud graphs, power analysis software and multiple serial protocol triggering and decoding, they are ideal for engineers and researchers.

Key Features

  • Bandwidth：350 MHz, 500 MHz, 1 GHz
  • Real-time sampling rate：5 GSa/s
  • Memory depth：250 Mpts
  • Waveform capture rate：500,000 wfm/s (Sequence mode)
  • Mixed Signal Measurement (MSO)

Product advantage

Multi-touch, remote control

SDS5000X is equipped with a 10.1-inch touch screen, you can quickly adjust the waveform position, set the area trigger, parameter selection and setup. SDS5000X supports up to dozens of parameter measurements, and if you use the traditional knob to select, it will undoubtedly consume a lot of time, the touch screen selection, saving time and effort. In addition, SDS5000X also supports external mouse and keyboard.

Web remote control (Webserver) allows remote control of the oscilloscope without the need to install large-capacity drivers, and through the rear VGA interface, measurement results can be demonstrated. Meanwhile, SDS5000X is also equipped with free upper computer software, which supports SCPI programming commands.

Rich trigger types

The SDS5000X supports up to 11 intelligent trigger types to quickly trigger signals with different characteristics. For example, using Runt (under-amplitude triggering), you can quickly trigger at a set amplitude value.

For special signals that may require close to 20 setup steps with conventional trigger types, the SDS5000X adds area triggering to all trigger types. Complex signals can be triggered in “” one step “” by simply drawing the trigger zone box.

Trigger sources supported by the SDS5000X include 4 analog channels, 16 digital channels, EXT,EXT/5, AC Line.

Triggering and decoding of serial protocols covering various industries

The SDS5000X offers a wide range of serial protocol triggering and decoding across multiple industries.

I2C, SPI Embedded serial protocol triggering and decoding
UART PC Serial Protocol Trigger and Decode
CAN, CAN FD, LIN, FlexRay Automotive serial protocol triggering and decoding
I2S Audio serial protocol triggering and decoding
MIL-STD 1553B Flight System Serial Protocol Triggering and Decoding

Powerful Measurement Functions

The SDS5000X currently supports more than 55 parameter measurements. The advanced measurement function can measure 12 parameters at the same time and display the trend of parameter values in the form of a trend graph. The statistics function can be opened to display the current value of the parameter, average value, minimum value, maximum value, standard deviation and the number of statistics. And the distribution of parameter values can be displayed in the form of histogram, for example, when measuring clock jitter, you can visualize the distribution of jitter.

If you want to select a specific area for measurement, you can use the threshold measurement function and then move the cursor to select the area.

The source options for measurement include analog and digital channels as well as signals after Zoom, MATH waveforms, and Ref waveforms.

All-in-one oscilloscope

The SDS5000X combines a variety of functions in one unit, greatly saving space and providing more value to the user.

16-channel Logic Analyzer
25 MHz Isolated Signal Source Module, which can be used with the baud plot function for power loop response testing
Template Testing
Digital Multimeter
Baud Plot Function
Power Supply Analysis Software
Counter
Frequency Counter

Product parameter

View All Parameters
Created with Pixso.
Comparative Data SDS5000X Tektronix 3 SeriesMDO Keysight 3000T XSeries
Bandwidth 350 MHz - 1 GHz 100 MHz - 1 GHz 100 MHz - 1 GHz
Channels 2/4 + EXT 2/4 + EXT 2/4 + EXT
Sample Rate(Max.) 5 GSa/s 5 GSa/s 5 GSa/s
Waveform Capture Rate (Max.) 500,000 wfm/s 280,000 wfm/s 1,000,000 wfm/s
Memory Depth (Max.) 250 Mpts 10 Mpts 4 Mpts
Intensity Grading and Color Temperature Display 256-level Intensity Grading and Color Temperature Display 256-level Intensity Grading and Color Temperature Display 64-level Intensity Grading and Color Temperature Display
Vertical Sensitivity 500 μV/div ～10 V/div 1mV~10V/div 1 mV/div ～ 5 V/div
Sequence Mode Support，100,000 frames Not Support Support，1000 frames
History Mode Support，100,000 frames Not Support Not Support
FFT 2 Mpts N/A 64 kpts
MASK Test Standard Optional Optional
Display 10.1 inch touch screen 11.6 inch touch screen 8.5 inch touch screen
Price $4,244 ~ $4,480 ~ $4,044 ~

* Note: The above prices and parameters were collected in official website on January 10th, 2024. In case of any discrepancy, the official website shall prevail.

Configure your instrument

Created with Pixso.
Options
Created with Pixso.
Accessories

Models

Add to Compare ModelsBandwidthChannelsVertical ResolutionSampling RateMemory DepthCapture Rate Price  

Resources

Probe (Standard)
Created with Pixso. Created with Pixso.

Product
Description
SP3050A
SP3050A

Passive probe, 500 MHz bandwidth, 10X attenuation ratio, input impedance of 11pF || 10MΩ, with automatic identification function.

Click to view the probe manual

Other
Created with Pixso. Created with Pixso.

Probe (Standard)
Created with Pixso. Created with Pixso.

Product
Description
SPL2016
SPL2016

16-channel logic probe (hardware), sampling rate and storage depth are determined by oscilloscope, which is suitable for dingyang technology SDS7000A, SDS6000 Pro, SDS6000L, SDS5000X HD, SDS5000X, SDS3000X HD, SDS2000X HD and SDS2000X Plus models.

Click to view the probe manual

SAP1000
SAP1000

Active single-ended probe, 1 GHz bandwidth, 10X attenuation ratio, input impedance of 1.2pF || 1MΩ, offset range of ±12V, SAPBus interface.

Click to view the probe manual

SAP2500
SAP2500

Active single-ended probe, bandwidth of 2.5 GHz, attenuation ratio of 10X, input impedance of 1.1pF || 1MΩ, offset range of ±12V, SAPBus interface.

Click to view the probe manual

HPB4010
HPB4010

High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF || 100MΩ.

Click to view the probe manual

DPB1300
DPB1300

High voltage differential probe, 50 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1300V, differential input impedance 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB4080
DPB4080

High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF || 54MΩ, BNC interface.

Click to view the probe manual

DPB5150
DPB5150

High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB5150A
DPB5150A

High voltage differential probe, 100 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1500V, differential input impedance 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB5700
DPB5700

High voltage differential probe, 70 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.

Click to view the probe manual.

DPB5700A
DPB5700A

High voltage differential probe, 100 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.

Click to view the probe manual

SAP2500D
SAP2500D
Active differential probe, bandwidth of 2.5 GHz, attenuation ratio of 10X, differential input impedance of 1pF || 200kΩ, offset range of 8V, SAPBus interface.
Click to view the probe manual.
TPA10
TPA10
The active probe interface of Dingyang oscilloscope SAPBus with TPA10 probe adapter can be used to adapt the active probe of Tektek TekProbe interface level II interface, which can supply power and DC bias for the probe without external power supply or other circuits.
Click to view the probe manual
SAP4000P
SAP4000P
Power rail probe, DC-4 GHz bandwidth, 1.1X attenuation ratio, input dynamic range ±600mV, offset range ±24V, SAPBus interface.
Click to view the probe manual.
CP4020
CP4020

Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.

Click to view the probe manual

CP4050
CP4050

Current probe, DC-1 MHz bandwidth, 2X/20X attenuation ratio, maximum input 50Arms/140Ap-p, 9V adapter power supply.

Click to view the probe manual

CP4070
CP4070

Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.

Click to view the probe manual.

CP4070A
CP4070A

Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply.
Click to view the probe manual

CP6030
CP6030

Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter.

Click to view the probe manual.

CP6030A
CP6030A

Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter.

Click to view the probe manual.

CP6150
CP6150

Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual.

CP6500
CP6500

Current probe, DC-5 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual.

SCP5030
SCP5030

Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, SAPBus interface.

Click to view the probe manual

SCP5030A
SCP5030A

Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, SAPBus interface.

Click to view the probe manual.

SCP5150
SCP5150

Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual

SCP5500
SCP5500

Current probe, DC-2 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, SAPBus interface.

Click to view the probe manual

CPL5100
CPL5100
Current probe, DC-600 kHz bandwidth, attenuation ratio of 10X/100X, current range of 50mA ~ 100Apk, powered by 12V adapter.

Other
Created with Pixso. Created with Pixso.

Trigger/decode Options
Created with Pixso. Created with Pixso.

Product
Description
SDS-5000X-1553B
SDS-5000X-1553B
MIL-STD-1553B Trigger/decode option
SDS-5000X-CANFD
SDS-5000X-CANFD
CAN FD Trigger/decode option
SDS-5000X-FlexRay
SDS-5000X-FlexRay

FlexRayTrigger/decode option

SDS-5000X-I2S
SDS-5000X-I2S

IIS Trigger/decode option

SDS-5000X-SENT
SDS-5000X-SENT

SENT Protocol Trigger and Decoding Kit (Software)

SDS-5000X-Manch
SDS-5000X-Manch

Manchester protocol decoding (software)

SDS-5000X-ARINC
SDS-5000X-ARINC

ARINC429 trigger & decode

Bandwidth/Channel Upgrade Options
Created with Pixso. Created with Pixso.

Created with Pixso.
Contact Us
400-878-0807
Created with Pixso.
Help Center
Created with Pixso.
Support

SIGLENT Store

After signing up, you can purchase products in the online store and enjoy membership benefits such as occasional discounts and promotional offers.

Shop Now Created with Pixso.
Hide Created with Pixso.
Created with Pixso. Help