Created with Pixso. Store Contact Us Created with Pixso.
Created with Pixso.
Trial
Created with Pixso.
Resource Center
Created with Pixso.
Issue Reporting
Created with Pixso.
Customer Service
Created with Pixso. Store Contact Us
Created with Pixso.

High resolution oscilloscope

SDS5000L Series

SDS5000L

Bandwidth

1 GHz

Real time sampling rate

5 GSa/s

Channels

8 + EXT

Created with Pixso.
Created with Pixso.
Created with Pixso. Quote
Created with Pixso. Datasheet
Created with Pixso. Video

SDS5000L

SDS5000L

Created with Pixso.

Product Introduction

SDS5000L are available in 8 channels, bandwidths of 350 MHz, 500 MHz and 1 GHz, have 12-bit ADCs with sample rate up to 5 GSa/s, maximum record length of 2.5 Gpts/ch. Multiple SDS5000L modules can be synchronized using a 64-channel distributor (SYN64) to form a high-channel-count acquisition system scalable up to 512 channels.

Key Features

Bandwidth：1 GHz, 500 MHz, 350 MHz
Memory depth： Up to 2.5 Gpts/ch waveform length
ADC：12-bit
Real time sampling rate： Up to 5 GSa/s
Waveform capture rates：Up to 160,000 wfm/s

Product advantage

Multi-channel timing test, power rail measurement completed in one go

Modern electronic systems incorporate various chips and modules whose initialization and operation may interfere with each other. Power-up sequence testing ensures that signals from different circuit modules follow the correct timing to avoid conflicts and guarantee system stability. For example, improper power-up sequences in communication systems can lead to data transmission errors. As circuit complexity increases, so do the challenges of power-up testing. The SDS5000L captures the entire power-up process of all relevant signals in a single acquisition, reducing measurement time, improving efficiency, and minimizing errors caused by repeated tests. For complex circuits with 8 power rails, this capability enables one-shot measurements.

Three-Phase Power Analysis

Using an 8-channel oscilloscope for three-phase power analysis allows simultaneous connection to all phases. It synchronously measures three-phase voltage and current signals, accurately capturing waveforms and parameters in real time. Users can directly observe and compare phase relationships to ensure balance. With the Fast Fourier Transform (FFT) function, multi-channel oscilloscopes perform harmonic analysis on three-phase signals. Optional three-phase analysis software supports vector diagram testing for motors, power quality assessment, ripple analysis, and efficiency evaluation.

Complete Wide Bandgap Semiconductor Testing Solution

The launch of Siglent latest 8-channel oscilloscopes and optically isolated probes completes the final piece of the wide bandgap semiconductor testing puzzle. The SDS5000L achieves a rise time at the picosecond (ps) level, capturing fast-switching waveforms of silicon carbide (SiC) and gallium nitride (GaN) devices. It analyzes transient voltage and current changes during switching, as well as characteristics like overshoot and ringing, to optimize circuit design and signal integrity.

Flexible Multi-channel High-speed Acquisition System with the SDS5000L

The SDS5000L features a compact form factor with a mere 1U height, enabling the construction of flexible multi-channel acquisition systems. Multiple units are combined to create a high-speed acquisition system with up to 512 channels by being triggered with low-skew synchronization signals from the 64-channel synchronization distributor SYN64 The host can access each unit over 1000M LAN. A complete SCPI command set as well as LabVIEW and IVI drivers are provided for easy data acquisition. The LAN port is LXI compliant. Sample clocks are synchronized between all units in the test system by cascading the 10 MHz In and 10 MHz Out clocks in a daisy chain. 

Product parameter

View All Parameters
Created with Pixso.

Configure your instrument

Created with Pixso.
Options
Created with Pixso.
Accessories

Models

Add to Compare ModelsBandwidthChannelsVertical ResolutionSampling RateMemory DepthCapture Rate Price  

Resources

Probe (Standard)
Created with Pixso. Created with Pixso.

Product
Description
SP5150A
SP5150A

Passive probe, 500 MHz bandwidth, 10X attenuation ratio, input impedance of 12pF || 10MΩ, with automatic identification function.

Click to view the probe manual

Other
Created with Pixso. Created with Pixso.

Probe
Created with Pixso. Created with Pixso.

Product
Description
SP6150A
SP6150A
Passive probe, 1.5 GHz bandwidth, 10X attenuation ratio, input impedance of 1.8pF || 500Ω, with automatic identification function.
SAP5000D
SAP5000D
Active differential probe, 5 GHz bandwidth, 10X attenuation ratio, differential input impedance of 400fF || 20kΩ, offset range of 12 V, SAPBus interface.
Click to view the probe manual
SAP2500D
SAP2500D
Active differential probe, bandwidth of 2.5 GHz, attenuation ratio of 10X, differential input impedance of 1pF || 200kΩ, offset range of 8V, SAPBus interface.
Click to view the probe manual.
SAP2500
SAP2500

Active single-ended probe, bandwidth of 2.5 GHz, attenuation ratio of 10X, input impedance of 1.1pF || 1MΩ, offset range of ±12V, SAPBus interface.

Click to view the probe manual

SAP1000
SAP1000

Active single-ended probe, 1 GHz bandwidth, 10X attenuation ratio, input impedance of 1.2pF || 1MΩ, offset range of ±12V, SAPBus interface.

Click to view the probe manual

HPB4010
HPB4010

High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF || 100MΩ.

Click to view the probe manual

DPB1300
DPB1300

High voltage differential probe, 50 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1300V, differential input impedance 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB4080
DPB4080

High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF || 54MΩ, BNC interface.

Click to view the probe manual

DPB5150
DPB5150

High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB5150A
DPB5150A

High voltage differential probe, 100 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1500V, differential input impedance 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB5700
DPB5700

High voltage differential probe, 70 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.

Click to view the probe manual.

DPB5700A
DPB5700A

High voltage differential probe, 100 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.

Click to view the probe manual

SCP5030
SCP5030

Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, SAPBus interface.

Click to view the probe manual

SCP5030A
SCP5030A

Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, SAPBus interface.

Click to view the probe manual.

SCP5150
SCP5150

Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual

SCP5500
SCP5500

Current probe, DC-2 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, SAPBus interface.

Click to view the probe manual

CPL5100
CPL5100
Current probe, DC-600 kHz bandwidth, attenuation ratio of 10X/100X, current range of 50mA ~ 100Apk, powered by 12V adapter.
CP4020
CP4020

Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.

Click to view the probe manual

CP4050
CP4050

Current probe, DC-1 MHz bandwidth, 2X/20X attenuation ratio, maximum input 50Arms/140Ap-p, 9V adapter power supply.

Click to view the probe manual

CP4070
CP4070

Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.

Click to view the probe manual.

CP4070A
CP4070A

Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply.
Click to view the probe manual

CP6030
CP6030

Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter.

Click to view the probe manual.

CP6030A
CP6030A

Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter.

Click to view the probe manual.

CP6150
CP6150

Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual.

CP6500
CP6500

Current probe, DC-5 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual.

SAP4000P
SAP4000P
Power rail probe, DC-4 GHz bandwidth, 1.1X attenuation ratio, input dynamic range ±600mV, offset range ±24V, SAPBus interface.
Click to view the probe manual.
ODP6050B
ODP6050B

Optical isolation voltage probe, 500 MHz bandwidth, common mode rejection ratio of 160dB, measuring voltage of 2.5 V ~ 2,500 V, isolation voltage of ±60kV.

Click to view the probe manual.

ODP6100B
ODP6100B

Optical isolation voltage probe, 1 GHz bandwidth, common mode rejection ratio of 160dB, measuring voltage of 2.5 V ~ 2,500 V, isolation voltage of ±60kV.

Click to view the probe manual.

Other
Created with Pixso. Created with Pixso.

Trigger/decode Options
Created with Pixso. Created with Pixso.

Product
Description
SDS5000L-I2S
SDS5000L-I2S

I2S trigger & decode (software)

SDS5000L-1553B
SDS5000L-1553B

MIL-STD-1553B trigger & decode (software)

SDS5000L-FlexRay
SDS5000L-FlexRay

FlexRay trigger & decode (software)

SDS5000L-CANFD
SDS5000L-CANFD

CAN FD trigger & decode (software)

SDS5000L-SENT
SDS5000L-SENT

SENT trigger & decode (software)

SDS5000L-Manch
SDS5000L-Manch

Manchester decode (software)

SDS5000L-ARINC
SDS5000L-ARINC

ARINC429 trigger & decode (software)

Analysis Options
Created with Pixso. Created with Pixso.

Bandwidth/Channel Upgrade Options
Created with Pixso. Created with Pixso.

Created with Pixso.
Contact Us
400-878-0807
Created with Pixso.
Help Center
Created with Pixso.
Support

SIGLENT Store

After signing up, you can purchase products in the online store and enjoy membership benefits such as occasional discounts and promotional offers.

Shop Now Created with Pixso.
Hide Created with Pixso.
Created with Pixso. Help