Created with Pixso. Store Contact Us Created with Pixso.
Created with Pixso.
Trial
Created with Pixso.
Resource Center
Created with Pixso.
Issue Reporting
Created with Pixso.
Customer Service
Created with Pixso. Store Contact Us
Created with Pixso.

High resolution oscilloscope

SDS1000X HD Series

SDS1000X HD

Bandwidth

200 MHz

Real time sampling rate

2 GSa/s

Channels

4+EXT

Created with Pixso.
Created with Pixso.
Created with Pixso. Quote
Created with Pixso. Datasheet
Created with Pixso. Video

SDS1000X HD

SDS1000X HD

Created with Pixso.

Product Introduction

SDS1000X HD series oscilloscopes not only retain their educational and friendly characteristics, but also improve their performance. The bandwidth is extended to100 MHz to 200 MHz to meet a wider range of teaching and experimental needs. The high-resolution display in HD mode makes the waveform more delicate and improves the learning experience.

Key Features

  • Bandwidth：100MHz，200 MHz
  • ADC：12-bit
  • Real time sampling rate： 2 GSa/s
  • Memory Depth： 100 Mpts/ch（One channel mode）
  • Capture rate：500,000 wfm/s（Sequence Mode）
  • Front ends with 70 μVrms noise floor @ 200 MHz bandwidth

Product advantage

12-bit high resolution:
perfectly restore waveform details

SDS1000X HD adopts a 12-bit analog-to-digital converter, which can achieve 4096 quantization levels, which is 16 times the signal resolution of traditional 8-bit oscilloscopes. Combined with the excellent noise floor, it can make the captured waveforms appear more clearly on the screen, which is conducive to the user’s observation as well as accurate measurement.

FFT: perfect combination of
time and frequency domain

With hardware accelerated FFT function, the maximum number of operation points is 2Mpts, which provides superior spectral resolution while still maintaining a high spectral refresh rate. FFT supports multiple window functions, three modes of normal, average and maximum hold, and can automatically mark the peak points and form a list.

Standard 7 kinds of decoding:
suitable for multiple scenarios

SDS1000X HD comes standard with I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, and the decoding results can be displayed in hexadecimal, decimal, binary, or ASCII format, and two parallel buses can be decoded at the same time, each of which is displayed as a graphic icon on the left side of the screen. In addition, the settings for the signals and the bus configurations can be synchronized to the triggers through the “Copy to trigger” function.

Power Analysis:
beneficial to power supply design

Power Analysis can help users to quickly measure and analyze a variety of items in the power electronics field, such as power quality, harmonics, inrush current, switching loss, etc. Power Analysis can also be used to analyze the power loop response in combination with Bode Plot. When you turn on the power analysis function, you can use the voltage and current probes correctly according to the “Connection Guide”.

16 digital channels: realizing
mixed signal acquisition and analysis

16 Channels Logic Analyzer can add 16 digital channels to the instrument without affecting other test functions, which can quickly solve the problems of analog-digital mixed-signal design and analysis.

Product parameter

View All Parameters
Created with Pixso.

Configure your instrument

Created with Pixso.
Options
Created with Pixso.
Accessories

Models

Add to Compare ModelsBandwidthChannelsVertical ResolutionSampling RateMemory DepthCapture Rate Price  

Resources

Probe (Standard)
Created with Pixso. Created with Pixso.

Product
Description
PP215
PP215

Passive probe, 200 MHz bandwidth, 1X/10X attenuation ratio and input impedance of 13pF || 1MΩ/10MΩ.

Click to view the probe manual

PP510
PP510

Passive probe, 100 MHz bandwidth, 1X/10X attenuation ratio, and input impedance of 13pf ||| 1mω/10mω.

Click to view the probe manual

PB470
PB470

Passive probe, 70 MHz bandwidth, 1X/10X attenuation ratio and input impedance of 13pF || 1MΩ/10MΩ.

Click to view the probe manual

Other
Created with Pixso. Created with Pixso.

Probe
Created with Pixso. Created with Pixso.

Product
Description
CPL5100
CPL5100
Current probe, DC-600 kHz bandwidth, attenuation ratio of 10X/100X, current range of 50mA ~ 100Apk, powered by 12V adapter.
DPB1300
DPB1300

High voltage differential probe, 50 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1300V, differential input impedance 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB4080
DPB4080

High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF || 54MΩ, BNC interface.

Click to view the probe manual

DPB5150
DPB5150

High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB5150A
DPB5150A

High voltage differential probe, 100 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1500V, differential input impedance 2pF || 10MΩ, BNC interface.

Click to view the probe manual

DPB5700
DPB5700

High voltage differential probe, 70 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.

Click to view the probe manual.

DPB5700A
DPB5700A

High voltage differential probe, 100 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.

Click to view the probe manual

HPB4010
HPB4010

High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF || 100MΩ.

Click to view the probe manual

CP4020
CP4020

Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.

Click to view the probe manual

CP4050
CP4050

Current probe, DC-1 MHz bandwidth, 2X/20X attenuation ratio, maximum input 50Arms/140Ap-p, 9V adapter power supply.

Click to view the probe manual

CP4070
CP4070

Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.

Click to view the probe manual.

CP4070A
CP4070A

Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply.
Click to view the probe manual

CP6030
CP6030

Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter.

Click to view the probe manual.

CP6030A
CP6030A

Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter.

Click to view the probe manual.

CP6150
CP6150

Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual.

CP6500
CP6500

Current probe, DC-5 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, powered by 12V adapter.

Click to view the probe manual.

Other
Created with Pixso. Created with Pixso.

Analysis Options
Created with Pixso. Created with Pixso.

Product
Description
SDS1000X HD-PA
SDS1000X HD-PA

Power analysis option

Created with Pixso.
Contact Us
400-878-0807
Created with Pixso.
Help Center
Created with Pixso.
Support

SIGLENT Store

After signing up, you can purchase products in the online store and enjoy membership benefits such as occasional discounts and promotional offers.

Shop Now Created with Pixso.
Hide Created with Pixso.
Created with Pixso. Help