SIGLENT Launches DPB6150 & SDP6150 Series High-Voltage Differential Probes
SIGLENT launched two new high-voltage differential probes: DPB6150 Series and SDP6150 Series, further enhancing its product portfolio in the power electronics testing domain. Specifically engineered to tackle the challenges of precise power measurements in high-noise environments, these probes leverage exceptional dynamic range and superior common-mode noise rejection capabilities to significantly improve the accuracy and reliability of signal measurements in high-voltage, high-noise conditions. They will become indispensable tools for engineers during the development and testing of switching power supplies, frequency converters, new energy systems, and various power electronic devices.
The DPB6150 and SDP6150 Series high-voltage differential probes feature a maximum bandwidth of 400 MHz and can measure voltages up to 1500 V. With excellent common-mode noise rejection, high input impedance, and low input capacitance, they enable precise measurement of differential voltage signals and floating signals. Equipped with one-touch zero calibration and audible-visual overload alarms, these probes ensure operational safety and convenience, making them widely applicable to R&D and maintenance of switching power supplies, electronic ballasts, variable-frequency appliances, and other electrical power devices.
DPB6150 & SDP6150 Electric Specifications
Siglent Launches SNA5000X-E Vector Network Analyzer
Compact, Cost-Effective 6.5 GHz VNA Delivering High Performance for R&D and Production
Siglent Technologies officially announces the release of the SNA5000X-E Vector Network Analyzer, a compact and cost-effective solution designed to meet essential RF testing requirements without compromising performance. Covering a frequency range from 9 kHz to 6.5 GHz and delivering a typical dynamic range of 125 dB, the SNA5000X-E provides accurate, reliable measurements for R&D, education, and production environments.
Positioned as an entry-level model within the SNA5000 series, the SNA5000X-E retains the core performance architecture of the SNA5000A family while offering enhanced cost-effectiveness for standard vector network analysis applications. It supports 1 Hz frequency resolution, adjustable IF bandwidth from 1 Hz to 10 MHz, and an output power range from –40 dBm to +10 dBm. With its 125 dB typical dynamic range, the instrument maintains excellent measurement stability and accuracy even in complex RF test scenarios.
The SNA5000X-E supports comprehensive S-parameter and differential measurements, along with integrated time-domain analysis, enhanced time-domain analysis, and spectrum analysis functions. These capabilities enable engineers to evaluate frequency-domain characteristics, analyze impedance discontinuities, and quickly locate faults within devices under test. A built-in eye diagram function further supports high-speed signal integrity analysis, improving debugging efficiency during development.
To address fixture-induced measurement errors commonly encountered in RF testing, the SNA5000X-E incorporates automatic fixture removal, port extension, de-embedding, and impedance conversion functions. These tools effectively compensate for cable delay and loss, minimizing systematic errors and ensuring high confidence in measurement results.
Designed for modern laboratories and production lines, the SNA5000X-E features a compact form factor with an instrument depth of only 12.6 cm and a weight of less than 5.4 kg. This significantly reduces workspace requirements compared to traditional network analyzers. The instrument is equipped with a 12.1-inch touchscreen that supports multi-window display and multiple data formats, creating an intuitive and efficient operating experience.
For production and automated test environments, the SNA5000X-E offers one-click filter characteristic analysis to quickly obtain key parameters such as insertion loss and bandwidth. It also supports custom formula operations and remote control via SCPI and WebServer, enabling seamless integration into automated systems and helping standardize and streamline testing workflows.
By returning to the fundamentals of vector network analysis, the SNA5000X-E combines essential performance, intelligent operation, and compact design in an economical solution. It provides a reliable, one-stop platform for applications ranging from R&D validation to batch quality inspection, enabling engineers to achieve professional RF measurement capability with optimized investment.
SIGLENT Launches SMM3000X Series Source/Measure Unit
February 27, 2026 — SIGLENT Technologies releases SMM3000X Series Source/Measure Unit (SMU). SMM3000X features 6½-digit resolution, output capability of up to ±210 V DC voltage, ±3.03 A DC current, and ±10.5 A pulsed current, with programming and measurement resolution down to 10 fA / 100 nV, and a maximum acquisition rate of 100,000 points/s.
The SMM3000X supports four-quadrant operation, enabling simultaneous sourcing and measurement for closed-loop source–measure operations on DUTs. It can function as a voltage source, current source, voltmeter, ammeter, and ohmmeter, and also supports pulse generation and arbitrary waveform output, making it an ideal platform for characterizing semiconductors and other nonlinear devices and materials.
High-Accuracy Pulse Simulation
In pulse mode, the SMM3000X series supports pulsed current output up to ±10.5 A, with a minimum pulse width of 50 μs. This allows precise emulation of transient operating conditions of power devices, such as switching loss testing for GaN and SiC devices, providing strong support for R&D and validation of wide-bandgap power semiconductors.
Linear and Log Sweep Functions
The SMM3000X supports linear, log and pulsed sweep modes. Users can define start and stop values with fixed step sizes to source voltage or current point-by-point, while automatically measuring and logging each data point. This enables fast characterization of devices such as diodes and transistors, allowing engineers to extract I-V curves and analyze conduction behavior under different operating conditions.
Flexible User-Defined Sequences
List mode allows users to define custom output sequences with minimum timing resolution down to 10 μs. Parameter changes can be linear, non-linear, arbitrary, or user-ordered. The SMM3000X outputs voltage or current according to the defined list while synchronously measuring and recording data—ideal for non-uniform sweeps, multi-segment tests, and complex stimulus profiles.
Data Visualization and Analysis
The SMM3000X series provides multiple display modes including Graph, Roll, and Measure views.
- Graph View enables real-time plotting of mathematical results.
- Roll View displays time-domain waveforms of acquired data.
- Measure View provides statistical analysis of traces.
These views offer multi-dimensional insight into test results, making data interpretation and debugging more intuitive.
Efficient Remote Programming and Control
Based on an advanced SCPI command set, the SMM3000X supports USB and LAN interfaces for seamless PC connectivity and automation. Users can operate the instrument via a built-in web interface or implement deep custom control using SCPI scripting. In addition, TCP/IP Socket communication is supported for flexible network-based test control and integration into automated test systems.
The SMM3000X series is designed to meet the precision testing needs of third-generation semiconductors, advanced optoelectronic devices, and emerging materials, while also significantly accelerating development cycles for new energy batteries and high-density integrated circuits. By improving both test efficiency and measurement accuracy, provides a powerful foundation for new product development and innovation.
Save Up To 10% On Our BEST SELLING Oscilloscopes
For a limited time, SIGLENT is offering remarkable discounts of up to 10% on our best-selling SDS800X HD Series oscilloscopes—the go-to choice for precision and performance.
For any newly purchased SDS812X HD, SDS814X HD, SDS822X HD, or SDS824X HD, you can get a 10% discount. For any newly purchased SDS802X HD or SDS804X HD, you can get a 5% discount.
Discount Details by Model:
| Models | Price | Discount | Promotion price |
| SDS802X HD | $356 | 5% | $338 |
| SDS804X HD | $461 | 5% | $438 |
| SDS812X HD | $461 | 10% | $415 |
| SDS814X HD | $587 | 10% | $528 |
| SDS822X HD | $660 | 10% | $594 |
| SDS824X HD | $839 | 10% | $755 |
Important Information：
* Promotion valid 10/10/2025 through 12/31/2025 with purchase of a new oscilloscope of the above models only.
* No other discounts or promotions apply.
* This promotion is only available in North America.
Save 20% on the SIGLENT SDS2000X Plus Oscilloscope
The SIGLENT SDS2000X Plus Oscilloscope integrates a high-performance ADC and a premium front-end design, which together ensure low noise and enhanced accuracy. Complemented by visualization and analysis tools, it empowers engineers to streamline their workflow efficiently.
For any newly purchased SDS2104X Plus, SDS2204X Plus, or SDS2354X Plus, you can get a 20% discount.
Discount Details by Model:
| Models | Price | Discount | Promotion price |
| SDS2104X Plus | $1,399 | 20% | $1,119 |
| SDS2204X Plus | $2,199 | 20% | $1,759 |
| SDS2354X Plus | $2,999 | 20% | $2,399 |
Important Information：
* Promotion expires on 3/31/2026 with purchase of a new oscilloscope of the above models only.
* This promotion is only available in North America.
To find out more about this great offer, contact quote@siglentna.com.
SIGLENT Launches New 8 GHz Digital Oscilloscope！
July 10, 2025 — SIGLENT has unveiled the enhanced SDS7000A/AP models, building on the success of its SDS7000A high-resolution digital oscilloscope series. The new models now feature bandwidth up to 8 GHz, a high-resolution 12-bit ADC, maximum 20 GSa/s sampling rate per channel, and a maximum memory depth of 2 Gpts/ch. New capabilities include 2.5G/5G/10GBase-T Ethernet Electrical Compliance Testing, MIPI-DPHY protocol analysis, Real-Time Spectrum Analysis (RTSA), Digital Down-Conversion (DDC), and upgraded CAN XL decoding.
2.5G/5G/10GBase-T Ethernet Electrical Compliance Testing
The upgraded SDS7000A series now supports full electrical compliance testing for 2.5G/5G/10GBase-T Ethernet, including critical parameters such as output drop, transmitter timing jitter, power spectral density, and MDI return loss. These features help ensure devices meet IEEE standards. Engineers can automatically generate IEEE 802.3-2018-compliant compliance test reports in HTML, XML, or PDF formats, including pass/fail status, threshold values, measured results, margin analysis, and waveform displays. This visually rich and data-driven reporting streamlines troubleshooting and product optimization.
MIPI-DPHY Compliance Testing
The SDS7000A series also supports MIPI-DPHY compliance analysis based on the CTS 1.0 specification. The oscilloscope captures HS-TX and LP-TX signaling on both data and clock lanes using its 12-bit ADC and ≥4 GHz bandwidth, combined with 5 GHz active differential probes. Eye diagram functionality is integrated for evaluating signal integrity, with automated configuration and report generation.
Real-Time Spectrum Analysis (RTSA)
Equipped with RTSA and digital down-conversion (DDC) technologies, the SDS7000A supports up to 1 GHz Real-Time analysis bandwidth. Advanced display modes include density plots, spectrum monitoring, and 3D visualizations. Compared to traditional superheterodyne spectrum analyzers, the SDS7000A offers higher bandwidth and faster signal acquisition — ideal for capturing transient events in 5G NR, 4G LTE, and Wi-Fi.
Integrated Vector Signal Analysis (SigVSA)
The SDS7000A features SigVSA vector signal analysis software, allowing direct signal analysis from DDC output without external equipment. It supports demodulation of signal types ranging from basic BPSK to complex wideband signals, such as those in 4G LTE, 5G NR, IEEE 802.11b/a/g/n/ac/ax/be standards, and 4096QAM. Both real-time and offline waveform analysis are supported, providing flexibility for laboratory and post-processing workflows.
Enhanced CAN XL Decoding Support
The SDS7000A series oscilloscopes provide comprehensive CAN protocol testing capabilities, with full support for CAN XL decoding in addition to CAN/CAN FD, enabling seamless coverage of automotive bus systems from low-speed diagnostics (10 kbps) to high-speed domain control (20 Mbps). The instrument supports both low-power and high-speed modes, making it well-suited for automotive and industrial control applications. The oscilloscope features 16 total channels (4 analog and 12 digital) for synchronized decoding and comprehensive fault analysis, including collision detection and signal reflections.
The SDS7000A also supports Wake-on-LAN (WoL), enabling users to remotely power up the instrument via Ethernet — ideal for automated test environments where physical access is limited.
With these cutting-edge features, the SDS7000A/AP oscilloscopes provide a powerful and versatile platform for engineers in data centers, wireless communications, consumer electronics, and automotive applications.
Siglent Launches 8-Channel 1 GHz Bandwidth High-Resolution Oscilloscope
The accelerating transformation across industries like automotive, renewable energy, and industrial automation is driven by the rise of advanced power electronics. High-efficiency inverters, the switch to wide-bandgap semiconductors, and tightly integrated control loops are pushing the limits of traditional test tools. As systems become more compact and capable, engineers must observe and correlate more signals across multiple domains with greater precision. Legacy oscilloscopes, designed for simpler tasks, often fall short. Today’s development workflows demand multi-channel instruments that offer deep insight, high signal fidelity, and application-focused analysis to meet the growing complexity of next-generation power and control systems.
2.5G/5G/10GBase-T Ethernet Electrical Compliance Testing
The upgraded SDS7000A series now supports full electrical compliance testing for 2.5G/5G/10GBase-T Ethernet, including critical parameters such as output drop, transmitter timing jitter, power spectral density, and MDI return loss. These features help ensure devices meet IEEE standards. Engineers can automatically generate IEEE 802.3-2018-compliant compliance test reports in HTML, XML, or PDF formats, including pass/fail status, threshold values, measured results, margin analysis, and waveform displays. This visually rich and data-driven reporting streamlines troubleshooting and product optimization.
MIPI-DPHY Compliance Testing
The SDS7000A series also supports MIPI-DPHY compliance analysis based on the CTS 1.0 specification. The oscilloscope captures HS-TX and LP-TX signaling on both data and clock lanes using its 12-bit ADC and ≥4 GHz bandwidth, combined with 5 GHz active differential probes. Eye diagram functionality is integrated for evaluating signal integrity, with automated configuration and report generation.
Real-Time Spectrum Analysis (RTSA)
Equipped with RTSA and digital down-conversion (DDC) technologies, the SDS7000A supports up to 1 GHz Real-Time analysis bandwidth. Advanced display modes include density plots, spectrum monitoring, and 3D visualizations. Compared to traditional superheterodyne spectrum analyzers, the SDS7000A offers higher bandwidth and faster signal acquisition — ideal for capturing transient events in 5G NR, 4G LTE, and Wi-Fi.
Integrated Vector Signal Analysis (SigVSA)
The SDS7000A features SigVSA vector signal analysis software, allowing direct signal analysis from DDC output without external equipment. It supports demodulation of signal types ranging from basic BPSK to complex wideband signals, such as those in 4G LTE, 5G NR, IEEE 802.11b/a/g/n/ac/ax/be standards, and 4096QAM. Both real-time and offline waveform analysis are supported, providing flexibility for laboratory and post-processing workflows.
Enhanced CAN XL Decoding Support
The SDS7000A series oscilloscopes provide comprehensive CAN protocol testing capabilities, with full support for CAN XL decoding in addition to CAN/CAN FD, enabling seamless coverage of automotive bus systems from low-speed diagnostics (10 kbps) to high-speed domain control (20 Mbps). The instrument supports both low-power and high-speed modes, making it well-suited for automotive and industrial control applications. The oscilloscope features 16 total channels (4 analog and 12 digital) for synchronized decoding and comprehensive fault analysis, including collision detection and signal reflections.
The SDS7000A also supports Wake-on-LAN (WoL), enabling users to remotely power up the instrument via Ethernet — ideal for automated test environments where physical access is limited.
With these cutting-edge features, the SDS7000A/AP oscilloscopes provide a powerful and versatile platform for engineers in data centers, wireless communications, consumer electronics, and automotive applications.
SIGLENT Releases ODP6000B Series Optically Isolated Voltage Probes
Driven by the increasing demand for highly reliable test equipment in fields such as semiconductors, new energy systems, and materials characterization, SIGLENT introduces the ODP6000B Series Optically Isolated Voltage Probes. The ODP6000B Series provides reliable solutions for testing floating high-voltage signals, third-generation semiconductor power devices, and new energy inverters.
High Bandwidth
Featuring bandwidth options of 500 MHz and 1 GHz, the ODP6000B Series utilizes advanced fiber optic transmission technology. Through electrical-optical-electrical conversion, it achieves complete electrical isolation between signal input and output, delivering ultra-high Common-Mode Rejection Ratio (CMRR). This makes it exceptionally suitable for testing switch-mode power supplies, motor drives, new energy inverters, and variable frequency drives. Particularly in high-frequency circuit testing involving third-generation semiconductors like Gallium Nitride (GaN) and Silicon Carbide (SiC), the ODP6000B excels at suppressing high-frequency common-mode noise, enabling precise measurement results.
High Performance
Compared to conventional probes, optically isolated probes offer superior CMRR and isolation voltage. They achieve an outstanding CMRR of up to 160 dB when measuring low-frequency DC signals, and maintain a robust 70 dB CMRR even at 1 GHz. This ensures effective suppression of common-mode interference across both low and high frequencies. Additionally, these probes provide an isolation voltage rating as high as ±60 kV, enabling safe electrical isolation during floating high-voltage signal testing and protecting both engineers and test equipment from hazardous high-voltage circuits.
Wide Measurement Range
When testing high-voltage or high-power circuits, the ODP6000B Series, combined with various attenuators, can measure a wide range of voltage signals from millivolts to kilovolts without compromising signal-to-noise ratio. This exceptional versatility provides an efficient solution for testing wide-bandgap (WBG) semiconductor circuits.
ODP6000B Series Electrical Specifications
SIGLENT celebrates the grand opening of its first full-process overseas production base in Malaysia
On June 12, 2025, SIGLENT held a grand opening ceremony for its first full-process overseas production base in Penang, Malaysia. Themed “Synergizing Visions, Engineering Futures”, the event was attended by over 40 distinguished guests from government and business sectors including YB Jason H’ng Mooi Lye, Penang State Exco for Local Government and Town and Country Planning; H.E. Mr. Zhou You Bin, Consul General of the People’s Republic of China in Penang; Datuk Yeoh Soon Hin, Chairman of the Penang Port Commission & Deputy Chairman of the Tourism Malaysia; and representatives from key government agencies, partners and suppliers.
As SIGLENT’s first full-process overseas production base, the Penang facility has completed its Phase I of construction and installed core manufacturing equipment. It integrates R&D, production, after-sales service, supply chain management, and operations, establishing a stable and comprehensive operational structure.
Mr. Qin Ke, the Chairman and President of SIGLENT, highlighted that the Penang base is a key step in SIGLENT’s global strategy in his speech. With an initial investment of around RM 10 million, the Penang facility has successfully completed the construction of its production setup and localizing the supply chain. A Phase II investment of around RM 100 million is planned to further expand the facility with additional product lines and supporting equipment, significantly enhancing SIGLENT’s mass production capabilities.
“Penang was chosen for its strategic location by the Strait of Malacca, its mature electronics industry ecosystem, highly skilled workforce, and strong government support for technological advancement and innovation”, Mr. Qin Ke noted.
YB Jason H’ng Mooi Lye, Penang State Exco for Local Government and Town and Country Planning, emphasized that SIGLENT’s decision to establish this milestone facility in Penang affirms the state’s global reputation as a hub for high-tech manufacturing.
He believed that the grand opening of SIGLENT’s first overseas full-process production base in Penang would strengthen the state’s electronics value chain and spur economic growth.
H.E. Mr. Zhou You Bin, Consul General of the people’s Republic of China in Penang, expressed his pleasure in witnessing a Chinese tech manufacturing company launch a new chapter in Malaysia. As China and Malaysia enter a “Golden 50 Years” of bilateral relations, he expressed hope that SIGLENT will seize the opportunity to grow boldly in Penang and become a flagship for economic and technological cooperation between the two countries, deepening mutual friendship and win-win collaboration.
Datuk Yeoh Soon Hin, Chairman of the Penang Port Commission & Deputy Chairman of the Tourism Malaysia, also warmly welcomed SIGLENT, assuring future support in ensuring efficient logistics, port accessibility, and regulatory coordination.
During the ceremony, Mr. Qin Ke outlined SIGLENT’s long-term vision in Malaysia, emphasizing that the new subsidiary is more than just a manufacturing site — it is set to become a full-chain overseas operations base. In addition to advancing trade cooperation, SIGLENT plans to actively collaborate with local universities through joint labs and talent development programs, driving innovation and contributing to the upgrading of the local electronics industry.
From early cooperation with Amazon to the establishment of subsidiaries in the U.S. and Germany in 2014 and in Japan in 2022, SIGLENT has remained committed to building a global manufacturing and supply network. The launch of the Malaysian facility marks a major step forward in this journey. Looking ahead, SIGLENT will continue expanding its overseas manufacturing footprint, with localized bases in Europe, the Americas, and Asia, to enhance global supply capabilities for its core products.
Compact All-in-One Handheld Signal Analyzer for 5G/LTE Field Testing
Siglent introduces the SHA860A series, a next-generation handheld signal analyzer designed to revolutionize 5G/LTE field testing. Combining spectrum analysis, vector network analysis, and cable/antenna testing into a single portable platform, the SHA860A delivers unparalleled versatility for base station deployment, maintenance, and on-site troubleshooting. Key specifications include a 9 kHz to 7.5 GHz frequency range (usable from 5 kHz), 110 MHz real-time analysis bandwidth, and advanced capabilities such as 5G NR/LTE OTA testing, real-time spectrum analysis, pulse analysis, IQ data acquisition, and GPS-synchronized indoor/outdoor mapping and so on.
5G NR OTA Measurement
During 5G base station deployment, operators require precise validation of network quality and beam performance. The SHA860A’s 5G NR OTA mode demodulates signals to extract key parameters, including frequency, physical cell identity (PCI), SSB index, frequency error, and error vector magnitude (EVM) for the SSB portion, visualized via constellation diagrams. This functionality is vital for optimizing 5G Non-Standalone (NSA) deployments, ensuring seamless coordination between LTE and 5G networks.
LTE FDD/TDD OTA Measurement
The LTE OTA testing feature provides comprehensive demodulation metrics such as PCI, sector ID, cell group, frequency error, time offset, synchronization status, and power levels (PSS/SSS/CRS/PBCH), alongside EVM measurements and constellation diagrams. By analyzing signal quality, channel performance, and interference across multiple cells, technicians can implement targeted strategies to enhance network efficiency and user experience.
Real-Time Spectrum Analysis
With a 110 MHz real-time bandwidth and 300,000 FFT/s processing speed, the SHA860A captures transient signals as short as 3.51 µs at 100% Probability of Intercept (POI). Advanced tools like frequency mask triggering (FMT), Density, 3D, Spectrogram, and Power vs. Time (PvT) displays enable multi-dimensional analysis of complex signals, ideal for interference hunting and spectrum monitoring in dynamic 5G environments.
Cable and Antenna Test
Component faults compromise base station performance, leading to coverage gaps and signal strength degradation. The SHA860A streamlines maintenance with rapid single-port cable loss, return/insertion loss, VSWR, and distance-to-fault measurements. An optional upgrade adds 1-Path 2-Port vector network analyzer functionality, supporting S11/S21 testing, Smith chart displays, and a remarkable 114 dB dynamic range for precise amplitude/phase response analysis.
Pulse Profile Analysis
The pulse analysis function featuring 10,001 measurement points to evaluate power, pulse transitions, and signal characteristics using multiple detection modes (positive/negative peak, sample, average, and conventional). This ensures rigorous validation of RF device performance in real-world conditions.
Indoor/Outdoor Mapping
Beyond base station testing, identifying 5G/LTE coverage in specific areas is crucial. The indoor/outdoor mapping feature enables technicians to locate base stations, track antenna orientation/height, and identify weak coverage or high-interference zones. With data logging, playback, and ±0.01 ppm accuracy post-GPS lock, it simplifies network optimization in both indoor and outdoor environments.
IQ Data Acquisition
Signal and spectrum analyzer with IQ data acquisition function is a common signal acquisition tool. Equipped with 1 GB RAM, 300 MHz sample rate, and 110 MHz bandwidth, the SHA860A provides a powerful combination of specifications, functions and portability for users collecting data in the field environment. Users can transmit and store IQ data via USB or LAN for offline analysis, so as to reproduce signals and visualize spectrum details with unmatched clarity.
The Siglent SHA860A consolidates critical 5G/LTE testing tools into a single handheld device, empowering technicians to validate beam performance, detect interference, and optimize networks with precision. Its excellent real-time bandwidth, GPS mapping, and comprehensive OTA capabilities accelerate deployments while ensuring reliable service delivery, enabling technicians to tackle complex field challenges with unmatched precision and convenience.
