SDS1000X-E series is a high-quality product launched by SIGLENT for economical market. It provides 70 MHz to 200 MHz bandwidth, 1 GSa/s sampling rate and rich trigger options to ensure the accuracy and reliability of test results. It is an ideal choice for beginners and users with limited budget.
Key Features
2 + EXT/4 channels，1 GSa/s Real time sampling rate
Bandwidth：100 MHz、200 MHz
1 Mpts FFT
True measurement and math can use all 14 Mpts of memory
Free Serial bus triggering and decoding：IIC, SPI, UART, RS232, CAN, and LIN
Product advantage
Deep Memory Depth, High Capture Rate
Digital trigger system, high trigger sensitivity and low jitter 256-level Intensity Grading and Color Temperature Display With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture the transients or low-probability events Using max record length of up to 14 Mpts, users are able to oversample to capture for longer time periods at higher resolution
Revolution in Data Analysis Processing
True fast measurement and math to all of 14M sample points so that there is minimal distortion on analysis With hardware co-processor, faster data operations 1 M point FFT operation Support Zoom, Gating, Math measurement and statistics Support 38 automatic measurement functions
Power Loop Response Analysis / Bode Plot
(4-channel series only)
Stability is a very important indicator in power supply design. In general, stability measurement requires a special frequency response analyzer, but it is very expensive. Siglent offers an affordable solution: SDS1000X-E oscilloscope and signal source Power loop measurement with standard Free Bode Plot II software.
· higher measurement sensitivity and accuracy
· Variable excitation scan mode allowed for complex test scenarios of the power control loop test box
· User-friendly UI design
· List and cursor measurements, more intuitive
Standard Serial Decoding
Most oscilloscopes on the market do not offer serial decoding for free but SDS1000X-E does. Serial decoding is free and includes IIC, SPI, UART, CAN, and LIN.
The waveform and data can be displayed at the same time and the detailed decoding information is displayed in the form of a list, and the data can be stored and exported.
Powerful Debugging and Analysis Capabilities
Event search and navigation to quickly locate events of interest. MSO logic analyzer integration, mixed signal analysis tool The combination of history and sequence mode, quickly capture abnormal waveforms Hardware-based Pass/Fail mode for long-term monitoring signals
Remote Control via Web Pages
With built-in Web Server, there is no need to install driver software and PC software. You can control the instrument, observe waveforms, obtain measurement results using the browser remotely. Especially when instruments used in high pressure, high temperature and other special environments. The SDS1000X-E supports both web and mobile web layouts, making it easier to control the instrument even on your phone.
Fixed some bugs:
1. SCPI instruction configuration exception when inactive channel is set as trigger source.
2. Under the interpolation time base, CSV files need to save the original sampling points, not the interpolated points.
3. After recalling the settings file, sometimes the cursor settings are incorrect.
4. In tracking mode, using the SCPI command to change the source of an X cursor will cause the sources of X1 and X2 to change simultaneously.
5. After setting the reference level for FFT, power down and restart to restore the reference level error.
6. In the average sampling mode, when the time base is modified under a large time base, the waveform does not clear the old sampling points.
7. SCPI instruction reads FFT cursor, returns incorrect unit.
8. Sometimes UART decoding stop bit judgment error.
9. When the unit is mHz, the frequency value read by SCPI is in MHz units, which confuses uppercase and lowercase.
8.1.16 6.1.33/6.1.37R10 Yes
8.1.11 6.1.33/6.1.37R10 No
8.1.9 6.1.33/6.1.37R10 No
8.1.8 6.1.33/6.1.37R10 No
Update instructions
Important!
Because 6.1.33 fixed a bug with self- calibration for each channel. Please perform a self-calibration if the machine is updated to 6.1.33 (or higher)
Very important!
Optimized communication between SDS1xx4X-E and SLA1016. If the SDS1xx4X-E will be upgraded to this version (or higher), the SLA1016 MUST be upgraded to 8.1.16 (or higher) first.
Very important!
Because 6.1.20R1 fixed a bug with self- calibration for each channel, immediately perform a self-calibration if the machine is updated to 6.1.20R1 (or higher)
USB-A to USB-B. Used to connect instrument to PC for communication.
Power cord
The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.
SDS1000X-E QuickStart
Quick use guide of SDS1000X-E series oscilloscopes.
Probe
Product
Description
HPB4010
High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF || 100MΩ.
Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply. Click to view the probe manual
DPB4080
High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF || 54MΩ, BNC interface.
High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF || 10MΩ, BNC interface.
USB arbitrary waveform generator SAG1021I (isolated)
USB arbitrary waveform generator module (isolated) integrates sine wave, square wave, triangular wave, pulse wave, noise, DC and 45 kinds of built-in arbitrary waves. Users can also edit arbitrary waveforms through EasyWave PC software.
STB-3 Demo board
Signals include various sine and square waves, AM, burst, and common serial bus signals.
SDS1X-E-RMK
SDS1X-E-RMK cabinet installation kit, suitable for SDS1000X-E and SDS2000X-E models.
Portable soft bag BAG-S1
suitable for SDS2000X-E, SDS1000X/X+, SDS1000X-E/X-C, SDS1000A/E+/F+/CNL+/DL+series
TL_WN725N
USB WIFI adapter (4-channel series support)
SLA1016
16-channel logic probe (hardware), sampling rate and storage depth are jointly determined by oscilloscope and probe, which is suitable for SIGLENT technology SDS1000X HD, SDS800X HD and SDS1000X-E (4CH) models.
