Spectrum Analyzer

SSA3000X Series

SSA3000X

Frequency Range

9 kHz -3.2 GHz

Resolution Bandwidth

1 Hz ~ 1 MHz

Phase Noise

< -98 dBc/Hz

SSA3000X

SSA3000X

Created with Pixso.

Product Introduction

SSA3000X series covers the frequency range from 9 kHz to 3.2 GHz, which is suitable for spectrum analysis from basic to mid-range.

Key Features

  • Frequency Range from 9 kHz to 2.1/3.2 GHz
  • -161 dBm/Hz Displayed Average Noise Level (Typ.)
  • -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)<
  • <Amplitude Accuracy0.7 dB
  • 1 Hz Minimum Resolution Bandwidth (RBW)

Product advantage

Economical Spectrum Analyzer with Excellent Performance

With their light weight, small size, and friendly user interface, the SSA3000X present a large, bright easy to read display, powerful and reliable automatic measurements, and plenty of impressive features. Applications include research and development, education, production, maintenance, and pre-compliance testing.

· Bandwidth 9 kHz to 2.1 GHz / 3.2 GHz, minimum resolution bandwidth 1 Hz
· Display average noise level below -161 dBm/Hz, full amplitude accuracy better than 0.7 dB
· Standard preamplifier, remote control instruction set, EasySpectrum PC software
· Free tracking generator, transmission response, VSWR measurement, signal power measurement, EMI pre-compliance test

Low-cost EMI Pre-compliance Solution

Extensive features and accessory support for EMI diagnostics and EMI pre-compliance testing, including:

· Test compensation Correction, frequency response compensation for probe, antenna, LISN, cable
· Support Limit line , Including EMI international standard limit template, or user-defined limit line
· Compliant CISPR 16 EMI filter and quasi-peak detector for quasi-peak measurement dwell time
· Support SRF5030T near-field probe set to find interference sources for radiation, cables, PCBs, etc.
· Provide SEM5040A artificial power network for single-phase device conducted disturbance voltage measurement
· EasySpectrum PC software, supports complete EMI pre-compliance test automation implementation process
· The PC software also supports the file configuration of the whole process, which is convenient for project management.

SWR and Transmission Response Measurement

The SSA3000X can be used as a network analyzer:

· With the tracking generator, the filter transmission response and the cable insertion can be measured
· With tracking source and external directional coupler (RB3X25), it can measure antenna and cable standing wave ratio VSWR, return loss

Abundant Power Measurement

With variety of wireless communication signal power measurement capabilities:

· CHP, Channel Power
· ACPR, Adjacent Channel Power Ratio
· OBW, Occupied Bandwidth
· T-Power, Time Domain Power
· TOI, Third-Order Intercept
· Spectrum Monitor

Product parameter

Configure your instrument

Add to Compare ModelsFrequency RangePhase Noise(typ.)Display Average Noise Level (DANL)Resolution Bandwidth (RBW)Tracking Generator Price  

Resources

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
USB Cable
USB Cable

USB-A to USB-B. Used to connect instrument to PC for communication.

Power cord
Power cord

The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.

SSA3000X Quick Guide
SSA3000X Quick Guide

Quick guide included with the instrument.

Universal accessories
Created with Pixso. Created with Pixso.

Product
Description
SRF5030T
SRF5030T

Three magnetic field near-field probes (5 mm, 10 mm, 20 mm) and one electric field near-field probe (5 mm) with frequency range of 300 kHz ~ 3 GHz and resolution of 5 mm, 10 mm, 20 mm are suitable for EMI radiation interference and intensity detection.

Click to view the calibration kit manual

SSA-RMK
SSA-RMK

6U high 482.6 mm wide

UkitSSA3X
UkitSSA3X

Reflection bridge, 1 MHz to 2.5 GHz; 2 x N(M)-N(M)

Click to view the RF cable and connector manual

Portable soft BAG-S2
Portable soft BAG-S2

Portable soft BAG-S2,suitable forSSA3000X Plus, SSA3000X, SVA1000X,SDS5000X,SDS3000X HD,SDS2000X Plus series

N-BNC-2L
N-BNC-2L

2 GHz bandwidth, Length 0.7 m (27.6 inches)

Click to view the RF cable and connector manual

N-N-6L
N-N-6L

6 GHz bandwidth, Length 0.7 m (27.6 inches)

Click to view the RF cable and connector manual

N-SMA-6L
N-SMA-6L

6 GHz bandwidth, Length 0.7 m (27.6 inches).

Click to view the RF cable and connector manual

N-N-18L
N-N-18L

18 GHz bandwidth, Length 1.0 m

Click to view the RF cable and connector manual

N-SMA-18L
N-SMA-18L
USB-GPIB Adapter
USB-GPIB Adapter

Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard.

RB3X25
RB3X25

Reflect Bridge (1 MHz~2.5 GHz), N (M) -N (M) adaptor (2 pcs)

Other
Created with Pixso. Created with Pixso.

Product
Description
TG-SSA3000X
TG-SSA3000X

TG measurement software

AMK-SSA3000X
AMK-SSA3000X

Advanced measurement software

EMI-SSA3000X
EMI-SSA3000X

EMI measurement software

RBSSA3X20 (Discontinued)
RBSSA3X20 (Discontinued)

Reflection Measurement Kit (Software)

Hide Created with Pixso.