Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.

Dear SIGLENT members,

Before you use a SIGLENT product, please ensure that it is in proper working condition. Check that the power cord and all connection cables are intact; if any damage is found, replace them immediately. Next, follow the instructions to connect it to the power supply, press the power-on button, and wait for the product to complete its self-check and initialization process automatically. During this process, closely monitor the display screen to ensure that no exceptions or errors occur.

Set the relevant parameters according to your experiment requirements, such as experimental temperature, time, and pressure. Please carefully read the operation manual of your product to ensure all settings are correct. In addition, make sure that all necessary consumables and accessories are properly installed and meet the required standards.

在处理样品时，需要特别小心。确保样品处理过程符合实验规范，并将样品稳如地放置于仪器的指定位置，确保其稳定性和准确性。

Then, press the Start or Run button. The product will operate automatically according to the preset parameters. During operation, regularly check the product’s status to ensure no exceptions occur and that the experiment is progressing as expected.